Built by: eimkeith (t4r.org) This Panhard Correction Kit (PCK) returns the Panhard bar to horizontal (per original design), eliminates the need for an aftermarket adjustable Panhard bar to recenter...
Spec's: Polyurethane bushings B7 Threaded studs, rated at 150,000 PSI Drilled hex tubes with right and left hand threads Chromoly heim joints All Grade 8 hardware All links with bushings on one end...
2-3 Week Lead Time
96-02 4Runner Front Extended Brake Lines
3" Longer to accommodate extra suspension travel
13" Overall Length
DOT Standard High Quality Ends
Sold as a pair (L+R nonspecific)
Tef...
IN STOCK AS OF 9/27/2023
A custom 2006-2009 4th Gen grille with a 3rd Gen Tacoma TRD Pro insert installed in the middle! With emblem color, lighting, and surround color options, you can make your ...
Fits: 2003-2021 4Runners, 07-14 Fj Cruisers, GX470Ships within a 1-2 business days A set of 3/16" steel plates to body mount chop your 03+ 4Runner! Designed for optimal tire clearance without havin...
ALL NEW V2.0 FILLER PANELS WITH FULLY SEALED ONE PIECE LEDSLooking for a turn signal location after adding an aftermarket bumper? These are the filler panels you need! Connect these to your existin...
Our 3rd Generation 4runner Ditch Light Brackets give you the ability to run aftermarket lights on the hood of your 4Runner. The product comes powder coated in a black finish.
Dropshipped directly f...
Tired of tearing inner CV boots when aftermarket lift kits have been installed? 1" drop down spacer lowers the front differential and restores the factory inner CV angles. Inexpensive upgrade to...
Built by: eimkeith (t4r.org)In stock and ready to ship This Panhard Correction Kit returns the Panhard bar to horizontal (per original design), eliminates the need for an aftermarket adjustable Pan...
IN STOCK AS OF 9/27/2023
A custom 2003-2005 4th Gen grille with a 3rd Gen Tacoma TRD Pro insert installed in the middle! With emblem color, lighting, and surround color options, you can make your g...
IN STOCK!
Includes UHMW lift blocks, 6061 aluminum steering spacer, and grade 8 hardware
Radiator drop brackets not included
Instructions can be found here
IN STOCK96-00 4Runner Rear Extended Brake Lines
3" Longer to accommodate extra suspension travel
13.5" Overall Length
DOT Standard High Quality Ends
Sold as a individual
Teflon lined brake hoses g...
Info to know before you order:The skid plates are uncoated raw steel. There may be small imperfections on the surfaces of the parts, such as small areas of surface rust or shallow scratches caused ...
IN STOCK!
Each kit includes UHMW lift blocks and new hardware
1.5" and 2.0" kits include new 6061 aluminum steering spacers (Not required with 1.0" kit)
Radiator drop brackets not included
Instruc...
A handbuilt custom flush mesh grille for 96-02 3rd Gen 4Runners. With mesh, emblem, lighting, and surround color options, you can make your grille stand out from the others!
PAINT OPTIONS:
If you ...
Spec's: Polyurethane bushings B7 Threaded studs, rated at 150,000 PSI Drilled hex tubes with right and left hand threads Chromoly heim joints All Grade 8 hardware All links with bushings on one end...
IN STOCK 2/6/2023A 1996 -2002 3rd Gen grille with a 3rd Gen Tacoma TRD Pro insert installed in the middle! With emblem color, lighting, and surround color options, you can make your grille stand ou...
High-Lift Hood Strut Kits (by SPIKER Engineering) Our kits replace your truck’s prop-rod with high-lift hood struts
Unique capability to choose your hood open height, from stock height to 8” abov...
Replacing the stock amber lens with a clear lens, these custom corner lights are a great option to modernize the front end of your 4runner. The interior of the housing come painted black at an addi...
Designed for superior performance across all terrain, an Old Man Emu suspension upgrade by ARB will provide noticeable improvements to a vehicle’s performance, including load carrying capacity and ...
Custom made ditchlight brackets for all 3rd gen 4runners (96-02) and 1st Gen Tacomas (96-04). These brackets will allow you to mount pod lights anywhere along the A pillars. They are laser cut and ...
Must have reinforcement for anyone who wants to play in the dirt! Strengthens spindle uprights and prevents the knuckle from damage during hard impacts. 1/8" prebent laser cut mild steel brackets...
