Build Time: 1-2 Weeks
Don't want to wait for some retrofits? We have you covered! We have pre-optioned headlights ready to go!
Switchback halo: This option means the halo only changes between amber...
Info to know before you order:
This bumper will not work with body lifts without leaving an additional gap between the bumper and the grille. It will work with stock height and suspension lifted v...
3rd Gen 4Runner 5100/OME Lift Kit - Current Lead Time: 1 Week
Coils on Backorder
883-12/14 ETA
Includes:
Front and Rear OME Coil Springs
Bilstein 5100 4Runner Adjustable Struts
Bilstein 5100 3...
A handbuilt custom flush mesh grille for 96-02 3rd Gen 4Runners. With mesh, emblem, lighting, and surround color options, you can make your grille stand out from the others!
PAINT OPTIONS:
If you ...
ETA 12/08/2023
A custom 2003-2009 Lexus GX470 grille with a TRD Pro insert installed in the middle! With emblem color, lighting, and surround color options, you can make your grille stand out from ...
Looking to upgrade your rearview mirror with some modern features? This replacement arm is what you need! An aftermarket mirror allows you to have features like temperature, garage door opener, an...
Info to know before you order:
THIS IS A WELDED BUMPER!
In order to get the tightest fitment and strongest mounting design possible, there is some modification required. You will have to trim 2 ...
Built by: eimkeith (t4r.org) This Panhard Correction Kit (PCK) returns the Panhard bar to horizontal (per original design), eliminates the need for an aftermarket adjustable Panhard bar to recenter...
Questions about your build?
Building an offroad vehicle can get complex, let our team of experts do the heavy lifting. Talk to a Personal Build Assistant now.
3rd Gen 4Runner 5100/OME Lift Kit - Current Lead Time: 1 Week
Coils on Backorder
883-12/14 ETA
Includes:
Front and Rear OME Coil Springs
Bilstein 5100 4Runner Adjustable Struts
Bilstein 5100 3...
Built by: eimkeith (t4r.org) This Panhard Correction Kit (PCK) returns the Panhard bar to horizontal (per original design), eliminates the need for an aftermarket adjustable Panhard bar to recenter...
Spec's: Polyurethane bushings B7 Threaded studs, rated at 150,000 PSI Drilled hex tubes with right and left hand threads Chromoly heim joints All Grade 8 hardware All links with bushings on one end...
96-02 4Runner Front Extended Brake Lines
3" Longer to accommodate extra suspension travel
13.5" Overall Length
DOT Standard High Quality Ends
Sold as a pair (L+R nonspecific)
Teflon lined brake h...
ALL NEW V2.0 FILLER PANELS WITH FULLY SEALED ONE PIECE LEDSLooking for a turn signal location after adding an aftermarket bumper? These are the filler panels you need! Connect these to your existin...
Our 3rd Generation 4runner Ditch Light Brackets give you the ability to run aftermarket lights on the hood of your 4Runner. The product comes powder coated in a black finish.
Dropshipped directly f...
Tired of tearing inner CV boots when aftermarket lift kits have been installed? 1" drop down spacer lowers the front differential and restores the factory inner CV angles. Inexpensive upgrade to...
Make your TRD grille stand out from the other with this easy to install Tri Color grille badge!Lead time: IN STOCK! This is only an estimate and may occasionally be slightly longer or shorter depen...
ARB 170112 Differential Axle Breather KitWhen drivetrain assemblies such as your vehicle’s differentials, gearbox and transfer case heat up under normal operation, the air inside expands and increa...
Two is better than one, right? We think so, which is why we're offering a pair of Squadron-R Sport LED auxiliary lights with wiring harness for $239.95. Similar to the Squadron Sport, the Squadron-...
Info to know before you order:THIS iS A DIY BUMPER!This bumper will not work with body lifts without leaving a gap. It will work with stock height and suspension lifted vehicles.There may be small ...
CKMTA12 - ARB On-Board High Performance 12 Volt Twin Air CompressorARB's new CKMTA12 and CKMTA24 twin on-board compressor kits were designed to fill the market need for a compact sized yet high-vol...
Includes all components needed to repair tires
No need to remove tire from vehicle
Includes 40 self vulcanizing repair cords
Coming in a compact carry case, the speedy seal includes all the compon...
ARB 170112 Differential Axle Breather KitWhen drivetrain assemblies such as your vehicle’s differentials, gearbox and transfer case heat up under normal operation, the air inside expands and increa...
Rear shock mounts looking a little vulnerable on your brand new Bronco? We've got you covered! These skids were designed to protect your shocks without sacrificing clearance. No need to worry abou...
Spare Tire Delete Description
Easy bolt on installation that reuses factory hardware
CNC precision cut from ⅛” steel
Compatible with our Bronco rear bumper, stock bumper, or other equivalents
Inclu...
Two is better than one, right? We think so, which is why we're offering a pair of Squadron-R Sport LED auxiliary lights with wiring harness for $239.95. Similar to the Squadron Sport, the Squadron-...
Tired of seeing that ugly wire grommet coming out of your tailgate? We've got you covered!This bottle opener replaces the factory wire grommet that connects to your stock spare tire setup. By reloc...
Know you are going to be wheeling hard with your new Bronco? Don't settle for body mounted rock sliders. These rock sliders mount directly to the frame and are designed to take a beating!
With 3 le...
CKMTA12 - ARB On-Board High Performance 12 Volt Twin Air CompressorARB's new CKMTA12 and CKMTA24 twin on-board compressor kits were designed to fill the market need for a compact sized yet high-vol...
Subscribe & Save!
Be the first to know about new products and exclusive discounts!
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
