Info to know before you order:The skid plates are uncoated raw steel. There may be small imperfections on the surfaces of the parts, such as small areas of surface rust or shallow scratches caused ...
A little about the product:
1/4" Steel
Bolt-On Application
Optional tie in point with our 4th gen hybrid front bumper
Comes with new grade 8 hardware
Lead time: 1-2 Weeks This is only an estim...
Custom made ditchlight brackets for all 3rd gen 4runners (96-02) and 1st Gen Tacomas (96-04). These brackets will allow you to mount pod lights anywhere along the A pillars. They are laser cut and ...
Custom made CB Antenna mounts for all 3rd gen 4runners (96-02). These mounts will allow you to mount a CB radio antenna on the back of your rig. They attach to the bolts for the rear hatch bump sto...
Custom 3rd brake light light cover that attaches to your spoiler and allows your brake light to display either Toyota or TRD when on.Must have a spoiler!Comes primed and ready for paintMounting har...
Info to know before you order:
THIS IS A DIY (DO IT YOURSELF) KIT! It is shipped as multiple pieces and the customer welds it themselves.
There may be small imperfections on the surfaces of the...
The first 3rd Gen 4runner grille of its kind! Laser-cut out of 16 gauge HRPO steel.You have the option to have cutouts for two LED cube lights, which provide both a killer look and extra light outp...
Info to know before you order:
THIS IS A DIY (DO IT YOURSELF) KIT! It is shipped as multiple pieces and the customer welds it themselves.
In order to get the tightest fitment and strongest moun...
Info to know before you order:
THIS IS A DIY (DO IT YOURSELF) KIT! The Open Wing Hybrid Bumper is shipped as multiple pieces and the customer welds it themselves.
In order to get the tightest f...
Info to know before you order
Weld on kit sliders with kickout for 3rd generation 4runners. Round tubing is made out of 1.75" OD 11 gauge ERW. Square tubing is 2"x2" 11 gauge. Mounting plates and ...
Info to know before you order:
THIS IS A WELDED BUMPER!
There may be small imperfections on the surfaces of the parts, such as small areas of surface rust or shallow scratches caused during the ...
Info to know before you order:
THIS IS A DIY (DO IT YOURSELF) KIT! The Closed Wing Hybrid Bumper is shipped as multiple pieces and the customer welds it themselves.
In order to get the tightest...
Custom made light bar brackets for all 3rd Gen 4runners (96-02) and 1st Gen Tacomas (96-04) These light bar brackets allow you to mount a 42" curved light bar above the windshield. They are laser c...
Info to know before you order:
THIS IS A WELDED BUMPER!
In order to get the tightest fitment and strongest mounting design possible, there is some modification required. You will have to trim 2 ...
Info to know before you order:
THIS iS A DIY BUMPER!
This bumper will not work with body lifts without leaving a gap. It will work with stock height and suspension lifted vehicles.
There may b...
This is the first 96-02 3rd Gen 4Runner True North Fabrications Armor Package! Each package includes a front and rear bumper along with options for front bumper style, grille guards, swingouts, and...
Info to know before you order:
The skid plates are uncoated raw steel. There may be small imperfections on the surfaces of the parts, such as small areas of surface rust or shallow scratches cause...
Know you are going to be wheeling hard with your new Bronco? Don't settle for body mounted rock sliders. These rock sliders mount directly to the frame and are designed to take a beating!
With 3 le...
Custom made light bar brackets for all 3rd Gen 4runners (96-02) and 1st Gen Tacomas (96-04). These light bar brackets allow you to mount a 42" curved lightbar above the windshield. They are laser c...
Info to know before you order:
THIS IS A DIY (DO IT YOURSELF) KIT! It is shipped as multiple pieces and the customer welds it themselves.
There may be small imperfections on the surfaces of the...
Info to know before you order:
THIS IS A DIY KIT!
This bumper will not work with body lifts without leaving a gap. It will work with stock height and suspension lifted vehicles.
There may be s...
Info to know before you order:
This bumper will not work with body lifts without leaving an additional gap between the bumper and the grille. It will work with stock height and suspension-lifted v...
Info to know before you order:
THIS IS A DIY (DO IT YOURSELF) KIT! It is shipped as multiple pieces and the customer welds it themselves.
This bumper will not work with body lifts without leavi...
Info to know before you order:
THIS IS A WELDED BUMPER!
In order to get the tightest fitment and strongest mounting design possible, there is some modification required. You will have to trim 2 ...
