2001-2002 3G 4Runners had an integrated cabin vent with trailer harness grommet. This model allows you to replace the old torn up vent and still route your harness through the O.E.M location.
Get ...
Unlock full control of your rear window anytime, without turning the key.
This Always-On Rear Window Switch Harness Kit is a 100% plug-and-play solution for 3rd gen Toyota 4Runners, allowing you to...
Overview:This center console molle panel system for the 1991–1994 80 Series Land Cruiser adds versatile mounting and storage capability without modification. Built for utility and customization, it...
Time to elevate your antenna game! The Sherpa Antenna Mount features an NMO-sized hole, making it easy to mount your HAM, CB, or GMRS antenna on your rack. The Sherpa WeBoost Mount features a hole ...
Mounting bracket sets from our full-length rack systems for your use in DIY setups.
*Will contain 4-6 brackets depending on the configuration selected at checkout.
CRESTONE BRACKETS do not work in...
Our adjustable mounting feet can be used in many applications. Perfect for building any DIY roof rack or upgrading the feet on most existing rack systems. These are also designed for our topper ra...
A new way to mount your essential gear for easy access and more storage on your 4th Gen 4Runner. Made out of 3/16 aluminum, this lightweight yet strong panel allows you to add convenient mounting o...
Traction board mounts that fit the Sherpa Window Panel. Designed to work with MaxTrax, ActionTrax, and TRED traction board devices.
MaxTrax, MaxTrax mounts, and Window Panel are sold separately. Wi...
Designed to sit off of a 1.75" diameter tube, these Hi Lift mounts can be added to almost any bumper/cage application. 3/8 SteelIncludes grade 8 hardware
Our new ULTIMATE Lift ND Hood Strut Kit for 1st Gen (’84-89) 4Runners and ’84-88 Toyota Pickups eliminates the prop rod and makes your engine compartment free and clear of obstacles.
The “ND” (“No...
The SRQ keychain/bottle opener is now here!Material and size: 1" x 4" 1/8" Thick Stainless SteelBuild Time: 1 weekInstall time: 5 minutesShipping: Free
The Sherpa Rotopax Mount
Mounting Rotopax on your Sherpa roof rack shouldn't involve any guesswork, so we made it super easy with our Sherpa Rotopax Mount.
These bolt on to any crossbar on your rac...
Designed for all Hi-Lifts and other similar trail jacks, this mount allows for mounting both along the rack and across it. Featuring aluminum knobs for easy removal, this mount is ready for your ne...
sPOD BantamX Touchscreen vehicle-specific kit for Toyota Tundra (22-on) has been designed specifically to integrate the sPOD Touchscreen panel into your cabin seamlessly while providing a safe plac...
The Propane Mount is built to take a beating. It's a rattle-free mount that locks your propane tank onto your van box, ladder, Molle panel, bedrail – or anything else you can run 1/4” bolts through...
Upgrade your Bronco’s interior with a precision-machined billet shift ring or reverse lockout from SRQ Fabrications. Designed to replace the factory plastic components, this upgrade delivers a clea...
Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides ...
This fuel tank lift kit isn't the easiest thing to install out of my product line (getting the existing tank crossmember out of the frame is tedious!) but it raises the tank 2" so it no longer han...
Lightbar-specific mounting brackets that are designed to position your light bar at the perfect height for the front of your rack. Cut and bent from 3/16” aluminum (Onx6 are 1/4"), these brackets a...
An awning mount designed to work with rooftop tents. This mount attaches to the sides of any of our crossbars and sits less than 3/4” above the rack. This bracket has 1 inch of in-out adjustment an...
This product currently has a 4-week lead time.Both the Sherpa Traction Board Mounts and the Sherpa Universal Crossbar Traction Board Mounts are Designed to work with MaxTrax, ActionTrax, and TRED t...
Cut and bent from 1/4” aluminum, these brackets are strong, sleek, and position the KC Gravity Pro6 light bar perfectly on the front of the rack.
Please note, the fairing must be removed for this t...
Skip to content