Skip to content
*MRR 3-Way Adjustable front struts [MRA59-A220] included.
Front Coil Spring Specs:
- C59-134 - V6 - Stock height replacement coil
- C59-296 - V6 - 1.5" lift, Stock front end load
- C59-300 - V6 - 2" lift, Stock front end load
- C59-302 - V6 - 2.5" lift, Stock front end load / 2" lift, 100-220LBS heavy load front weight
- C59-314 - V6 - 2.5" lift, 100-220LBS heavy load front weight
- C59-302 - V8 - 2" lift, Stock front end load
- C59-314 - V8 - 2.5" lift, Stock front end load / 2" lift, 100-220LBS heavy load front weight
- C59-352 - V8 - 2.0-2.25" lift, 200-240LBS heavy load front weight
Rear Coil Spring Specs:
- C59-323 - 0.5" lift, Stock rear end
- C59-599 - 1" lift, Stock rear end
- C59-505 - 1.5" lift, Stock rear end load
- C59-325 - 2" lift, Stock rear end load
- C59-327 - 2" lift, 200-400LB heavy rear load weight
- C59-329 - 2" lift, 600-800lbs heavy rear load weight
- C59-331 - 2" lift, 900-1000lbs super heavy rear load weight
- C59-675V - 2" Stock Load (Variable Rate, Long Travel)
- C59-677V - 2" 400lb Load / 3" Stock Load (Variable Rate, Long Travel)
- C59-701V - 2" 600lb Load / 3" 200lb Load (Variable Rate, Long Travel)
- C59-749V - 2" 800lb Load / 3" 400lb Load (Variable Rate, Long Travel)
- C59-849V - 2" 1000lb+ Load / 3" 600lb Load (Variable Rate, Long Travel)
Product Features:
- 3-way Adjustable shocks provide maximum adjustability and perfect ride quality for you.
- 10-Stage High-Speed Compression - For aggressive, high-speed off-roading through ruts and holes.
- 20 Stage Low-Speed Compression - For creepy crawling and cornering
- 15 Stage Rebound - Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminium Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM-HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low-wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High-Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
Notes:
- 2.5" or more of lift, new UCA's are recommended
- Coil seat for MRA59-A220 should be set at 226mm (8.83") for 3 inches of lift; for 2 inches of lift the coil seat should be set at 213mm (8.38") from the strut bushing eye. The black and white picture on the listing is a reference for how to measure. Please check our instructions section or reach out if you have any questions. If done incorrectly, you can damage the shocks, springs, and vehicle.