Old Man Emu is pleased to release Front Upper Control Arms for a range of popular 4wds. When an IFS vehicle is fitted with a suspension lift, the original caster and camber results can be pushed ou...
This suspension lift kit comes with Old Man Emu Nitrocharger shocks. Nitrocharger is a twin-tube design with the outer reserve tube providing protection to the internal components off road. Nitroch...
Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to op...
Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to op...
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring se...
Overview:Upgrade the factory sway bar end links on your 2021+ Ford Bronco with the ADS Adjustable Heavy Duty Sway Bar End Link Kit. Designed for lifted and long-travel applications, these links imp...
Overview:The ADS Direct Fit 2.5" Adjustable Reservoir Race Rear Shocks are engineered for 2000–2006 Toyota Tundras equipped with full leaf pack replacements and 2–3" of rear lift. Built for rugged ...
Overview:The ADS Tubular HD Upper Control Arm Kit is a heavy-duty upgrade for lifted 3rd Gen Tacomas (2016–2023), designed to correct alignment angles and enhance durability for off-road use. Built...
Overview:Race-grade 2.5" piggyback rear shocks for 1996–2002 4Runner models, designed for aggressive off-road use and consistent damping under heat and load. Ideal for high-speed trail driving and ...
*3-Way Adjustable front struts [MRA59-A220] included.
Front Coil Spring Specs:
C59-302 - (40mm-1.6") Stock front end
C59-314 - (50mm-2.0") Stock front end
C59-352 - (50mm-2.0") Heavy load f...
Front Coil Spring Specs:
C59-302 - (40mm-1.6") Stock front end
C59-314 - (50mm-2.0") Stock front end
C59-352 - (50mm-2.0") Heavy load front end (110-240lbs) / (60mm-2.4") Stock front end
C59-354 -...
*3-Way Adjustable front struts included [MRA59-A220]
Front Coil Spring Specs:
C59-134 - 1.25" - Stock front end load
C59-238 - 1.75" - Stock front end load
C59-296 - 2.0" - Stock front end load
C...
Front Coil Spring Specs:
C59-296 - 1.5" - Stock front end
C59-300 - 2.0" - Stock front end
C59-302 - 2.5" - With up to 110LBS load
C59-350 - 2.5" - With 250+ LBS constant load
Rear Coil Spring S...
Front Coil Spring Specs:
C59-296 - 1.5" - Stock front end
C59-300 - 2.0" - Stock front end
C59-302 - 2.5" - With up to 110LBS load
C59-350 - 2.5" - With 250+ LBS constant load
Rear Coil Spring S...
*Monotube IFP front struts included [IMS59-50220]
Front Coil Spring Specs:
C59-134 - 1.25" - Stock front end load
C59-238 - 1.75" - Stock front end load
C59-296 - 2.0" - Stock front end load
C59-...
*Monotube IFP front struts included [IMS59-50220]
Front Coil Spring Specs:
C59-300 - V8 - 1.5" Lift, Stock front end load
C59-302 - V8 - 2" lift, Stock front end load
C59-314 - V8 - 2.5" lift, St...
100% bolt on.
Lower links are constructed from 1.5".188 wall 4130 chromoly tubing for maximum strength and feature 1" stainless steel uniballs and urethane bushings.
Upper links are construct...
Replaces the weak factory alignment cam tab plates that bend during bottom outs or hard front impacts.Designed to keep your vehicle's wheel alignment setting secure under extreme driving conditions...
Light weight. Maximum ground clearance. Fully rebuildable. Bolt on.
Will work with all aftermarket brand shocks, up to a 3.0"
Billet CNC machined uniball cup houses a 1" 100% stainless steel...
100% bolt on.
Lower links are constructed from 1.5".188 wall 4130 chromoly tubing for maximum strength and feature 1" stainless steel uniballs and urethane bushings.
Upper links are construct...
Light weight. Maximum ground clearance. Fully rebuildable. Bolt on.
Will work with all aftermarket brand shocks, up to a 3.0"
Billet CNC machined uniball cup houses a 1" 100% stainless steel...
Skip to content
