2024+ 4th Gen Tacoma Dobinsons 1-3" MRR 3-Way Adjustable Lift Kit

*MRR 3-Way Adjustable front struts [MRA59-A490] included.

Front Coil Spring Specs:

• C59-818 (12mm - 0.5") Stock Load
• C59-820 (50mm - 2") 0-110lb Load
• C59-822 (50mm- 2") 110-220lb Load

Rear Coil Spring Specs:

• C59-869V (30mm - 1.25") Stock Load / (Stock Height) 50-100lbs
• C59-817V (55mm - 2.25") 50-100lb Load / (30mm - 1.25") 175-330lb Load
• C59-819V (55mm - 2.25") 175- 330lb Load / (30mm - 1.25") 440-660lb Load
• C59-821V (55mm - 2.25") 440-660lb Load / (30mm - 1.25") 880-1210lb Load
• C59-823V (55mm - 2.25") 880-1210lb Load / (30mm - 1.25") 1400-1600lb Load
• C59-825V (55mm - 2.25") 1400-1600lb Load / (30mm - 1.25") 1800-2000lb Load

Rear Shock Specs:

• MRA59-A887 - Extended Travel
• MRA59-A885 - Long Travel (Requires Extended Brake Lines and Bump Stops)

Product Features:

• 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
• Fully Rebuildable Design
• 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes.
• 20 Stage Low Speed Compression - For creepy crawling and cornering
• 15 Stage Rebound - Control your coils, prevent bucking
• 60mm CNC Machined High Flow Billet Aluminium Race Piston
• 2.6" Precision Honed Shock Body
• 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
• Upgraded 3 Stage FKM-HNBR Sealing System
• TSUGAMITM CNC machined components for precise tolerances
• ParkerTM Braided High Pressure Hoses
• 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
• T6 6061 Height Adjustable Spring Seat
• Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low-wear performance
• 60mm Full 6063 aluminum remote reservoir 
• Lightweight CNC Machined Low Friction floating piston
• High Quality O.E.M. Grade Natural Rubber Bushings
• Single Piece Lower Leg
• EDP Surface Protection
• Direct Bolt-On Design
• CNC TIG Precision Welded Body End Mounts

Note: Coil seat for MRA59-A490 should be set at 251mm (9.9") from the strut bushing eye to top of coil isolator.