Skip to content
Complete front and rear suspension package for the 2024+ Toyota Tacoma (4th Gen), built around ADS Racing Shocks Direct Fit Race Series components. Fits all trims including SR, SR5, TRD PreRunner, TRD Sport, TRD Off-Road, TRD Pro, Trailhunter, and Limited. Designed for the new TNGA-F platform with coil rear suspension.
Front Coilovers
ADS 2.5" Direct Fit Race Coilovers with remote reservoirs — extended travel, hard chrome shaft, zinc-plated body. Optional upgrade to adjustable clicker reservoirs for on-the-fly compression tuning.
Front Spring Rate / Lift (choose based on front-end load):
- 450 lb — 0-2.5" lift, stock and lightly-loaded front ends
- 500 lb — 1.0-2.5" lift, added front-end weight (bumper, winch, skids)
Rear Shocks
ADS 2.5" extended travel Direct Fit Race Shocks with remote reservoirs. Optional upgrade to clicker reservoirs for customizable damping.
Rear Springs (Dobinsons variable-rate — choose based on rear load):
- C59-869V — 1.25" lift stock load / factory height with 50-100 lb load
- C59-817V — 2.25" lift with 50-100 lb load / 1.25" lift with 175-330 lb load
- C59-819V — 2.25" lift with 175-330 lb load / 1.25" lift with 440-660 lb load
- C59-821V — 2.25" lift with 440-660 lb load / 1.25" lift with 880-1210 lb load (heavy camper, drawers, RTT)
What's Included
- (2) ADS front coilovers, assembled with selected spring rate
- (2) ADS rear shocks
- (2) Dobinsons rear coil springs matched to selected load
Install Notes
- Aftermarket upper control arms required — factory UCAs will bind at full droop with 2"+ of lift.
- Front spring rates are softer than earlier Tacomas by design — the 4th Gen front end is lighter, and the 450/500 lb rates are tuned to match. Don't spec a 600+ lb spring on this platform.
- Alignment required after install.
- Lift heights assume stock wheel/tire combos; measured lift varies with vehicle weight and accessories.
- Assembled in the USA by ADS Racing Shocks.
