Engineered for the 4Runner, the Eibach Pro-Truck Lift Stage 1 Plus is a pre-assembled front shock-and-spring system that drops in with no spring compression required, paired with matched rear shock...
Engineered for the GX470, the Eibach Pro-Truck Lift Stage 2 steps up to a Pro-Truck Coilover 2.0 up front with an adjustable threaded spring perch, paired with Pro-Truck Sport rear shocks and Pro-L...
The 200 Series Land Cruiser is a global icon built on capability and dependability. No surprise that SuperPro suspension parts are a go-to solution for Land Cruiser owners and specialists around th...
The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes. TRC494 - Extra Camber &...
+2 extended axle shafts. Retain 4WD when installing a TC +2" long travel kit. Reuse factory inner and outer CV joints and boots.
Specs & Features
Sold as a pair
(2) +2 extended axle shafts, 43...
Upgrade your steering performance with this Chromoly Heim Joint Tie-Rod Upgrade Kit, designed to eliminate sloppy steering and improve durability in demanding off-road conditions. Engineered to wor...
100% bolt on system. NUT, 7/8"-14 RHT JAM - QTY: (4)
Specs & Features
NUT, 8MM-1.25 FLANGE HEAD NUT - QTY: (2)
NUT, 3/4"-16 RHT JAM - QTY: (2)
HEIM SPACER, UPPER LINK - QTY: (4)
HEIM SPACER, ...
Unlike traditional add-a-leafs that obtain lift height at the cost of stiffening the spring rate and sacrificing ride quality, the 2007-2021 Toyota Tundra Rear Leaf Spring Expansion Pack replaces a...
Bolt-on +3.5" long travel kit for the 2004-2006 1st Gen Toyota Tundra. Upper and lower control arms extend track width 3.5" per side and bolt to the factory mounting locations for 12.5" of front wh...
Bolt-on +3.5" long travel kit for the 2000-2003 1st Gen Toyota Tundra. Upper and lower control arms extend track width 3.5" per side and bolt to the factory mounting locations for 12.5" of front wh...
UCA's are designed with added caster to aid in retaining factory alignment specs when aftermarket lift kits are installed. This reduces the darting or wandering in the vehicle's steering when 2.5" ...
Upgrade your suspension with the Stock Replacement Lower Control Arm Upgrade, designed for enhanced durability, improved alignment, and compatibility with aftermarket shocks. Constructed from fully...
Light weight. Maximum ground clearance. Fully rebuildable. Bolt on.
Will work with all aftermarket brand shocks.
Only upper control arm on the market that allows a 3.0" diameter coilover shock...
Upgrade your leaf spring suspension with this HD U-Bolt Plate Kit, specifically designed for 2.5" wide aftermarket leaf springs in a spring-under configuration (62" leaf spring). These plates featu...
Urethane bushing service kit for one pair of Total Chaos lower control arms. Refreshes the LCA pivots and restores tight steering feel.
Specs & Features
Urethane bushing kit servicing one pai...
Urethane bushing service kit for one pair of Total Chaos lower control arms. Refreshes the LCA pivots and restores tight steering feel.
Specs & Features
Urethane bushing kit servicing one pai...
Lifting the front of a vehicle with a set of coil over shocks may be step one in gaining more off-road performance, however installing just an aftermarket shock can cause limitations without upgra...
WeatherTech All-Weather Floor Mats feature deep sculpted channels designed to trap water, mud, road salt, and sand, providing dependable protection in any season. Made from a durable, rubber-like T...
WeatherTech FloorLiners offer advanced interior protection by precisely lining your vehicle’s footwells—covering the front, back, and even sides of the carpeted area. Laser-measured for a perfect f...
These universal weld on light brackets are designed to be welded to your steel tube bumper or other tubes with a diameter of 1.5" - 2" to provide a heavy duty mounting solution for almost all light...
Overview:Designed for 2003–2024 Toyota 4Runner models, these billet rear upper control arms use 7075-T6 aluminum for unmatched strength and resilience in off-road conditions. Perfect for replacing ...
Overview:Built for 2003–2024 4Runner models, these rear billet lower control arms use 7075-T6 aluminum to deliver exceptional resistance to bending and off-road abuse. Designed as a superior replac...
Product specifications:
Brand Name: Old Man Emu
GTIN: 09319092023141
Add-On: N/A
Bar Diameter: 19 mm
Coil Weight: 6.9 kg
Color: Black
Free Height: A: 390 mm / B: 390 mm
Material: X5K Micro...
Product Specifications:
Brand Name: Old Man Emu
GTIN: 09319092023134
Add-On: N/A
Bar Diameter: 18 mm
Coil Weight: 6.1 kg
Color: Black
Free Height: A: 390 mm / B: 390 mm
Material: X5K Micro...
![Old Man Emu (OME) Rear Coil Spring Set [2897]](http://www.srqfabrications.com/cdn/shop/files/2897_v5_535x.jpg?v=1742389009)
![Old Man Emu (OME) Rear Coil Spring Set [2897]](http://www.srqfabrications.com/cdn/shop/files/2897_v2_535x.jpg?v=1742389009)
![Old Man Emu (OME) Rear Coil Spring Set [2897]](http://www.srqfabrications.com/cdn/shop/files/2897_v5_345x345@2x.jpg?v=1742389009)
![Old Man Emu (OME) Rear Coil Spring Set [2896]](http://www.srqfabrications.com/cdn/shop/files/2896_v5_535x.jpg?v=1742389001)
![Old Man Emu (OME) Rear Coil Spring Set [2896]](http://www.srqfabrications.com/cdn/shop/files/2896_v2_535x.jpg?v=1742389001)
![Old Man Emu (OME) Rear Coil Spring Set [2896]](http://www.srqfabrications.com/cdn/shop/files/2896_v5_345x345@2x.jpg?v=1742389001)
Skip to content