{"title":"Total Chaos - Lower Control Arms","description":"","products":[{"product_id":"96-02-3rd-gen-4runner-total-chaos-lower-control-arms","title":"1996-2002 3rd Gen 4Runner Total Chaos Lower Control Arms","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eStock ball joints and rubber bushings eventually wear out and must be replaced. Sloppy steering and uneven tire wear are common when these parts become worn out or damaged.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThese TOTAL CHAOS lower control arms are designed to be compatible with the factory Toyota lower ball joint or the TC lower uniball conversion (sold separately). Rubber bushings are replaced with urethane bushings to provide better off road trail handling and steering response. Less bushing deflection allows the vehicle steering to be more responsive at higher speed on and off road.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThese fully rebuildable lower control arms are hand crafted from mild steel construction making them much stronger than the stock units. Available with single shock tabs or dual shock capability to maximize vehicle dampening control and performance. The factory sway bar can be reinstalled if dual shocks are not installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eComplete stock replacement lower control arm upgrade.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFully boxed mild steel construction features internal gussets for added strength.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLower ball joint location moved slightly forward to increase caster for alignment.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLower shock tabs are designed to work with all brand aftermarket coil over shocks.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLower control arms are pre-tabbed for dual 2.5\" diameter shock capability. Shock tabs can also be used to reinstall the stock sway bar with single shock applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCompatible with a factory Toyota ball joints or can be installed with the TC lower uniball conversion.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUrethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eZerk fittings allow for easy maintenance on the lower pivot bushings.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThree stage powder coat includes a durable clear coat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eNOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS\u003c\/span\u003e\u003c\/p\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":48252274311490,"sku":"96555-E","price":2142.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/96555-E.jpg?v=1712265296"},{"product_id":"2010-2024-5th-gen-4runner-total-chaos-lower-control-arms","title":"2010-2024 5th Gen 4Runner Total Chaos Lower Control Arms","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eStock ball joints and rubber bushings eventually wear out and must be replaced. Sloppy steering and uneven tire wear are common when these parts become worn out or damaged. You cannot individually order bushings or ball joints from Toyota for the factory lower control arms.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLCA's are 100% bolt-on and upgrade ball joints to a 1\" stainless steel uniball to maximize strength. Rubber bushings are replaced with urethane bushings to provide better off road trail handling and steering response. Less bushing deflection allows the vehicle steering to be more responsive at higher speed on and off road.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThese fully rebuildable lower control arms are hand crafted from 4130 chromoly construction making them much stronger than the stock units. Available with single shock tabs or dual shock capability to maximize vehicle dampening control and performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLight weight. Maximum ground clearance. Fully rebuildable. Bolt on.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBillet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIntegrated steering stop tabs retain factory turning angles.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUrethane pivot bushings reduce deflection compared to a rubber bushing offering a tigher steering feel. Zerk fittings allow for easy maintenance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4130 chromoly laser cut plates are fully boxed and include internal gussets.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStock length replacement lower A-arm - SINGLE SHOCK ONLY.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThree stage powder coat includes a durable clear coat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eNOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\u003c\/span\u003e\u003c\/p\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":48252342272322,"sku":"86555-E-10FJ-NSS","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-10FJ-NSS.jpg?v=1712267059"},{"product_id":"2016-2023-3rd-gen-tacoma-expedition-series-stock-length-lower-control-arms","title":"2016-2023 3rd Gen Tacoma Expedition Series Stock Length Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e \n Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e \n Billet CNC machined uniball cup houses a 1\" 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e \n Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e \n Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e \n 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e \n Stock length replacment lower A-arm dual shock capable.\u003cbr\u003e\u003cbr\u003e \n Secondary shock mount tabs allow a bypass shock to be added for maximum tunability. Dual shock configurations will require TC shock hoop PT 86610.\u003cbr\u003e\u003cbr\u003e \n NOT COMPATIBLE with ICON S2 secondary shock system. \u003cbr\u003e\u003cbr\u003e \n All dual shock lower control arms require a 1.25\" wheel spacer to keep the tire from hitting the second shock mount at full steering lock even if you do not have a secondary shock installed.\u003cbr\u003e\u003cbr\u003e \n Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e \n Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e \n NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745588674923,"sku":"86555-E-16","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-16.jpg?v=1734533303"},{"product_id":"2016-2023-3rd-gen-tacoma-expedition-series-stock-length-single-shock-lower-control-arms","title":"2016-2023 3rd Gen Tacoma Expedition Series Stock Length Single Shock Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e \n Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e \n Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e \n Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e \n Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e \n 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e \n Stock length replacement lower A-arm - SINGLE SHOCK ONLY.\u003cbr\u003e\u003cbr\u003e \n Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e \n Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e \n NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745588707691,"sku":"86555-E-16-NSS","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-16-NSS.jpg?v=1734533305"},{"product_id":"2005-2015-2nd-gen-tacoma-expedition-series-stock-length-lower-control-arms","title":"2005-2015 2nd Gen Tacoma Expedition Series Stock Length Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e \n Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e \n Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e \n Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e \n Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e \n 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e \n Stock length replacment lower A-arm dual shock capable.\u003cbr\u003e\u003cbr\u003e \n Secondary shock mount tabs allow a bypass shock to be added for maximum tunability. Dual shock configurations will require TC shock hoop PT 86610.\u003cbr\u003e\u003cbr\u003e \n NOT COMPATIBLE with ICON S2 secondary shock system. \u003cbr\u003e\u003cbr\u003e \n All dual shock lower control arms require a 1.25\" wheel spacer to keep the tire from hitting the second shock mount at full steering lock even if you do not have a secondary shock installed.\u003cbr\u003e\u003cbr\u003e \n Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e \n Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e \n NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745591296363,"sku":"86555-E-T","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-T.jpg?v=1734533360"},{"product_id":"2005-2015-2nd-gen-tacoma-expedition-series-stock-length-single-shock-lower-control-arms","title":"2005-2015 2nd Gen Tacoma Expedition Series Stock Length Single Shock Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e \n Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e \n Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e \n Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e \n Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e \n 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e \n Stock length replacement lower A-arm - SINGLE SHOCK ONLY.\u003cbr\u003e\u003cbr\u003e \n Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e \n Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e \n NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745591329131,"sku":"86555-E-T-NSS","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-T-NSS.jpg?v=1734533362"},{"product_id":"1996-2004-1st-gen-tacoma-expedition-series-stock-length-lower-control-arms","title":"1996-2004 1st Gen Tacoma Expedition Series Stock Length Lower Control Arms","description":"\u003cp\u003eUpgrade your vehicle's suspension with these high-strength, fully boxed lower control arms, designed as a direct replacement for stock components. Handcrafted in the USA, these lower control arms are constructed from durable mild steel with internal gussets for added strength and longevity. The lower ball joint location is repositioned slightly forward to increase caster, optimizing alignment and improving handling. Designed to work with all brands of aftermarket coil-over shocks, the control arms also come pre-tabbed for dual 2.5\" shock compatibility, making them an excellent choice for off-road enthusiasts.\u003c\/p\u003e\n\u003cp\u003eThese control arms feature urethane pivot bushings to reduce deflection compared to rubber bushings, delivering a tighter and more responsive steering feel. Zerk fittings are included for easy lubrication and maintenance, while the three-stage powder coat with a clear coat ensures long-lasting durability and corrosion resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete replacement lower control arms, designed for superior strength and performance.\u003c\/li\u003e\n\u003cli\u003eFully boxed mild steel construction with internal gussets for added durability.\u003c\/li\u003e\n\u003cli\u003eLower ball joint location moved forward to improve caster for better alignment and handling.\u003c\/li\u003e\n\u003cli\u003eCompatible with factory Toyota ball joints or TC lower uniball conversion kits.\u003c\/li\u003e\n\u003cli\u003ePre-tabbed for dual 2.5\" diameter shocks and designed to work with all aftermarket coil-over shocks.\u003c\/li\u003e\n\u003cli\u003eUrethane pivot bushings reduce deflection for a tighter steering feel.\u003c\/li\u003e\n\u003cli\u003eZerk fittings allow for easy lubrication and maintenance.\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA with a durable three-stage powder coat finish, including a clear coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with 4\"-7\" spindle\/drop bracket lift kits.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745592213867,"sku":"96555-E","price":2116.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/96555-E_c84ec941-2e60-499a-90eb-94221e305776.jpg?v=1734533430"},{"product_id":"2010-5th-gen-4runner-expedition-series-stock-length-single-shock-lower-control-arms","title":"2010-2024 5th Gen 4Runner Expedition Series Stock Length Single Shock Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e Stock length replacement lower A-arm - SINGLE SHOCK ONLY.\u003cbr\u003e\u003cbr\u003e Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745594343787,"sku":"86555-E-10FJ-NSS","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-10FJ-NSS_fc8e31bf-6525-4b4d-aa92-d97449451d15.jpg?v=1734533537"},{"product_id":"2010-5th-gen-4runner-expedition-series-stock-length-lower-control-arms-with-kdss","title":"2010-2024 5th Gen 4Runner Expedition Series Stock Length Lower Control Arms with KDSS","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e KDSS mounts on the lower control arm re-use factory Toyota hardware for ease of installation.\u003cbr\u003e\u003cbr\u003e Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e Stock length replacment lower A-arm dual shock capable.\u003cbr\u003e\u003cbr\u003e Secondary shock mount tabs allow a bypass shock to be added for maximum tunability. Dual shock configurations will require TC shock hoop PT 86610.\u003cbr\u003e\u003cbr\u003e NOT COMPATIBLE with ICON S2 secondary shock system. \u003cbr\u003e\u003cbr\u003e All dual shock lower control arms require a 1.25\" wheel spacer to keep the tire from hitting the second shock mount at full steering lock even if you do not have a secondary shock installed.\u003cbr\u003e\u003cbr\u003e Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\n\u003cimg src=\"..\/images\/product\/86555-E-10FJ-KDSS\/parts_list.png\" width=\"500px\"\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745594376555,"sku":"86555-E-10FJ-KDSS","price":2339.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-10FJ-KDSS.jpg?v=1734533539"},{"product_id":"2010-5th-gen-4runner-expedition-series-stock-length-single-shock-lower-control-arms-with-kdss","title":"2010-2024 5th Gen 4Runner Expedition Series Stock Length Single Shock Lower Control Arms with KDSS","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e KDSS mounts on the lower control arm re-use factory Toyota hardware for ease of installation.\u003cbr\u003e\u003cbr\u003e Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e Stock length replacement lower A-arm - SINGLE SHOCK ONLY.\u003cbr\u003e\u003cbr\u003e Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745594409323,"sku":"86555-E-10FJ-KDSS-NSS","price":2339.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-10FJ-KDSS-NSS.jpg?v=1734533541"},{"product_id":"2003-2009-4th-gen-4runner-expedition-series-stock-length-lower-control-arms","title":"2003-2009 4th Gen 4Runner Expedition Series Stock Length Lower Control Arms","description":"\u003cp\u003eThe TOTAL CHAOS Stock Length Dual Shock Lower Control Arms are designed to deliver lightweight strength, maximum ground clearance, and unmatched suspension performance. Built from 4130 chromoly with fully boxed laser-cut plates and internal gussets, these arms offer superior durability for aggressive off-road use while remaining bolt-on for convenience.\u003c\/p\u003e\n\u003cp\u003eThese control arms feature a \u003cstrong\u003ebillet CNC machined uniball cup\u003c\/strong\u003e with a 1\" stainless steel uniball, replacing factory ball joints for enhanced articulation and strength. The integrated steering stop tabs maintain factory turning angles, while urethane pivot bushings provide a tighter steering feel and easy maintenance via zerk fittings.\u003c\/p\u003e\n\u003cp\u003eDual shock mount tabs allow the addition of a bypass shock for maximum tunability. The arms are compatible with shocks up to 3.0\" in diameter and work with all aftermarket brands. However, a \u003cstrong\u003e1.25\" wheel spacer\u003c\/strong\u003e is required to prevent tire interference with the second shock mount at full lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStock length lower control arms with dual shock capability\u003c\/li\u003e\n\u003cli\u003eCompatible with shocks up to 3.0\" diameter (all brands)\u003c\/li\u003e\n\u003cli\u003eBillet CNC machined uniball cup with 1\" stainless steel uniball for increased strength\u003c\/li\u003e\n\u003cli\u003eIntegrated steering stop tabs retain factory turning angles\u003c\/li\u003e\n\u003cli\u003eUrethane pivot bushings reduce deflection and improve steering feel\u003c\/li\u003e\n\u003cli\u003eSecondary shock tabs for bypass shock installation (requires TC shock hoop PT 86610)\u003c\/li\u003e\n\u003cli\u003eConstructed with fully boxed, laser-cut 4130 chromoly plates and internal gussets\u003c\/li\u003e\n\u003cli\u003eThree-stage powder coat with durable clear coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with ICON S2 secondary shock system\u003c\/li\u003e\n\u003cli\u003eA 1.25\" wheel spacer is required for dual shock arms to avoid interference\u003c\/li\u003e\n\u003cli\u003eNot compatible with 4\"-7\" spindle\/drop bracket lift kits\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745595752811,"sku":"86555-E","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E.jpg?v=1734533629"},{"product_id":"2003-2009-4th-gen-4runner-expedition-series-stock-length-lower-control-arms-nss","title":"2003-2009 4th Gen 4Runner Expedition Series Stock Length Lower Control Arms NSS","description":"\u003cp\u003eThe TOTAL CHAOS Stock Length Single Shock Lower Control Arms are engineered for lightweight durability, maximum ground clearance, and superior off-road performance. Constructed from 4130 chromoly with fully boxed laser-cut plates and internal gussets, these arms are designed to replace stock lower control arms while providing significant strength and articulation improvements.\u003c\/p\u003e\n\u003cp\u003eA billet CNC machined uniball cup houses a 1\" stainless steel uniball, upgrading the factory ball joints for better articulation and increased strength. Integrated steering stop tabs retain factory turning angles, and urethane pivot bushings reduce deflection for a tighter steering feel. Zerk fittings make maintenance simple and hassle-free.\u003c\/p\u003e\n\u003cp\u003eThe coilover shock tab pocket design allows compatibility with a wider range of shocks, accommodating up to 3.0\" diameter shocks from all aftermarket brands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStock length single shock lower control arms\u003c\/li\u003e\n\u003cli\u003eBillet CNC machined uniball cup with 1\" stainless steel uniball for strength and articulation\u003c\/li\u003e\n\u003cli\u003eShock tab pocket supports shocks up to 3.0\" diameter (all brands)\u003c\/li\u003e\n\u003cli\u003eIntegrated steering stop tabs retain factory turning angles\u003c\/li\u003e\n\u003cli\u003eUrethane pivot bushings improve steering feel and reduce deflection\u003c\/li\u003e\n\u003cli\u003eConstructed from fully boxed, laser-cut 4130 chromoly plates with internal gussets\u003c\/li\u003e\n\u003cli\u003eLightweight, bolt-on design and fully rebuildable\u003c\/li\u003e\n\u003cli\u003eThree-stage powder coat finish for durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with 4\"-7\" spindle\/drop bracket lift kits\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745595785579,"sku":"86555-E-NSS","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-NSS.jpg?v=1734533632"},{"product_id":"1996-2002-3rd-gen-4runner-expedition-series-stock-length-lower-control-arms","title":"1996-2002 3rd Gen 4Runner Expedition Series Stock Length Lower Control Arms","description":"\u003cp\u003eUpgrade your vehicle's suspension with these high-strength, fully boxed lower control arms, designed as a direct replacement for stock components. Handcrafted in the USA, these lower control arms are constructed from durable mild steel with internal gussets for added strength and longevity. The lower ball joint location is repositioned slightly forward to increase caster, optimizing alignment and improving handling. Designed to work with all brands of aftermarket coil-over shocks, the control arms also come pre-tabbed for dual 2.5\" shock compatibility, making them an excellent choice for off-road enthusiasts.\u003c\/p\u003e\n\u003cp\u003eThese control arms feature urethane pivot bushings to reduce deflection compared to rubber bushings, delivering a tighter and more responsive steering feel. Zerk fittings are included for easy lubrication and maintenance, while the three-stage powder coat with a clear coat ensures long-lasting durability and corrosion resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete replacement lower control arms, designed for superior strength and performance.\u003c\/li\u003e\n\u003cli\u003eFully boxed mild steel construction with internal gussets for added durability.\u003c\/li\u003e\n\u003cli\u003eLower ball joint location moved forward to improve caster for better alignment and handling.\u003c\/li\u003e\n\u003cli\u003eCompatible with factory Toyota ball joints or TC lower uniball conversion kits.\u003c\/li\u003e\n\u003cli\u003ePre-tabbed for dual 2.5\" diameter shocks and designed to work with all aftermarket coil-over shocks.\u003c\/li\u003e\n\u003cli\u003eUrethane pivot bushings reduce deflection for a tighter steering feel.\u003c\/li\u003e\n\u003cli\u003eZerk fittings allow for easy lubrication and maintenance.\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA with a durable three-stage powder coat finish, including a clear coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with 4\"-7\" spindle\/drop bracket lift kits.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745597063531,"sku":"96555-E","price":2116.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/96555-E_1286fe48-4116-4e63-84af-69eaeb09ab9c.jpg?v=1734533711"},{"product_id":"2007-2021-2nd-gen-tundra-stock-length-lower-control-arms","title":"2007-2021 2nd Gen Tundra Stock Length Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e \n Will work with all aftermarket brand shocks.\u003cbr\u003e\u003cbr\u003e \n Only upper control arm on the market that allows a 3.0\" diameter coilover shock to be installed with no contact.\u003cbr\u003e\u003cbr\u003e\n Billet CNC machined uniball cup houses a 1\" 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e \n Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e \n Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e \n 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e \n Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e \n Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e \n NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745598734699,"sku":"87555-R","price":3389.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/87555-R.jpg?v=1734533802"},{"product_id":"2000-2003-1st-gen-tundra-expedition-series-stock-length-lower-control-arms","title":"2000-2003 1st Gen Tundra Expedition Series Stock Length Lower Control Arms","description":"\u003cp\u003eUpgrade your suspension with the \u003cstrong\u003eStock Replacement Lower Control Arm Upgrade\u003c\/strong\u003e, designed for enhanced durability, improved alignment, and compatibility with aftermarket shocks. Constructed from fully boxed mild steel with internal gussets, these lower control arms deliver exceptional strength and reliability for off-road and daily driving performance. Featuring dual shock tabs and forward ball joint placement for increased caster, this upgrade ensures better alignment and a tighter steering feel, making it a must-have for your suspension system.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction\u003c\/strong\u003e: Fully boxed mild steel with internal gussets for added strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Caster Alignment\u003c\/strong\u003e: Ball joint location moved slightly forward to enhance alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Shock Compatibility\u003c\/strong\u003e: Pre-tabbed for dual 2.5\" diameter shocks; works with all aftermarket coil over shocks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUrethane Pivot Bushings\u003c\/strong\u003e: Reduces deflection compared to rubber bushings, providing a tighter steering feel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Maintenance\u003c\/strong\u003e: Zerk fittings allow for convenient lubrication of lower pivot bushings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Finish\u003c\/strong\u003e: Three-stage powder coat with a durable clear coat for long-lasting protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Setup\u003c\/strong\u003e: Compatible with factory Toyota ball joints or TC lower uniball conversion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional Information:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Compatible\u003c\/strong\u003e: With 4\"-7\" spindle\/drop bracket lifts.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHandcrafted in the U.S.A.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKit Contents:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Fully Boxed Mild Steel Lower Control Arms with Dual Shock Tabs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745600405867,"sku":"97555-E","price":2192.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/97555-E.jpg?v=1734533839"},{"product_id":"2004-2006-1st-gen-tundra-expedition-series-stock-length-lower-control-arms","title":"2004-2006 1st Gen Tundra Expedition Series Stock Length Lower Control Arms","description":"\u003cp\u003eComplete stock replacement lower control arm upgrade for the 2004-2006 Tundra. For model years 2000-2003 use part number 97555-E.\u003cbr\u003e\u003cbr\u003eFully boxed mild steel construction features internal gussets for added strength.\u003cbr\u003e\u003cbr\u003eLower ball joint location moved slightly forward to increase caster for alignment.\u003cbr\u003e\u003cbr\u003eLower shock tabs are designed to work with all brand aftermarket coil over shocks.\u003cbr\u003e\u003cbr\u003eLower control arms are pre-tabbed for dual 2.5\" diameter shock capability.\u003cbr\u003e\u003cbr\u003eCompatible with a factory Toyota ball joints or can be installed with the TC lower uniball conversion.\u003cbr\u003e\u003cbr\u003eUrethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel.\u003cbr\u003e\u003cbr\u003eZerk fittings allow for easy maintenance on the lower pivot bushings.\u003cbr\u003e\u003cbr\u003eThree stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003eHand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003eNOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\u003c\/p\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745600438635,"sku":"97554-E","price":2192.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/97554-E.jpg?v=1734533841"},{"product_id":"2010-2014-fj-cruiser-expedition-series-stock-length-lower-control-arms","title":"2010-2014 FJ Cruiser Expedition Series Stock Length Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e \n Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e \n Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e \n Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e \n Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e \n 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e \n Stock length replacment lower A-arm dual shock capable.\u003cbr\u003e\u003cbr\u003e \n Secondary shock mount tabs allow a bypass shock to be added for maximum tunability. Dual shock configurations will require TC shock hoop PT 86610.\u003cbr\u003e\u003cbr\u003e \n NOT COMPATIBLE with ICON S2 secondary shock system. \u003cbr\u003e\u003cbr\u003e \n All dual shock lower control arms require a 1.25\" wheel spacer to keep the tire from hitting the second shock mount at full steering lock even if you do not have a secondary shock installed.\u003cbr\u003e\u003cbr\u003e \n Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e \n Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e \n NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745601618283,"sku":"86555-E-10FJ","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-10FJ_0de3e668-f490-469e-bea9-a1c528d61e1a.jpg?v=1734533894"},{"product_id":"2010-2014-fj-cruiser-expedition-series-stock-length-single-shock-lower-control-arms","title":"2010-2014 FJ Cruiser Expedition Series Stock Length Single Shock Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e \n Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e \n Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e \n Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e \n Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e \n 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e \n Stock length replacement lower A-arm - SINGLE SHOCK ONLY.\u003cbr\u003e\u003cbr\u003e \n Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e \n Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e \n NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745601651051,"sku":"86555-E-10FJ-NSS","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-10FJ-NSS_2bc27219-ce8d-4974-9896-56366ed719af.jpg?v=1734533896"},{"product_id":"2007-2009-fj-cruiser-expedition-series-stock-length-lower-control-arms","title":"2007-2009 FJ Cruiser Expedition Series Stock Length Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e \n Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e \n Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e \n Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e \n Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e \n 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e \n Stock length replacment lower A-arm dual shock capable.\u003cbr\u003e\u003cbr\u003e \n Secondary shock mount tabs allow a bypass shock to be added for maximum tunability. Dual shock configurations will require TC shock hoop PT 86610.\u003cbr\u003e\u003cbr\u003e \n NOT COMPATIBLE with ICON S2 secondary shock system. \u003cbr\u003e\u003cbr\u003e\n All dual shock lower control arms require a 1.25\" wheel spacer to keep the tire from hitting the second shock mount at full steering lock even if you do not have a secondary shock installed.\u003cbr\u003e\u003cbr\u003e \n Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e \n Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e \n NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745602699627,"sku":"86555-E","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E_abb78d4c-9e05-437a-b334-28db423134c4.jpg?v=1734533964"},{"product_id":"2007-2009-fj-cruiser-expedition-series-stock-length-single-shock-lower-control-arms","title":"2007-2009 FJ Cruiser Expedition Series Stock Length Single Shock Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e \n Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e \n Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e \n Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e \n Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e \n 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e \n Stock length replacement lower A-arm - SINGLE SHOCK ONLY.\u003cbr\u003e\u003cbr\u003e \n Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e \n Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e \n NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745602732395,"sku":"86555-E-NSS","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-NSS_e43f1ad8-59e3-4015-a9db-ea75e5798a66.jpg?v=1734533966"},{"product_id":"2001-2003-1st-gen-sequoia-expedition-series-stock-length-lower-control-arms","title":"2001-2003 1st Gen Sequoia Expedition Series Stock Length Lower Control Arms","description":"\u003cp\u003eUpgrade your suspension with the \u003cstrong\u003eStock Replacement Lower Control Arm Upgrade\u003c\/strong\u003e, designed for enhanced durability, improved alignment, and compatibility with aftermarket shocks. Constructed from fully boxed mild steel with internal gussets, these lower control arms deliver exceptional strength and reliability for off-road and daily driving performance. Featuring dual shock tabs and forward ball joint placement for increased caster, this upgrade ensures better alignment and a tighter steering feel, making it a must-have for your suspension system.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction\u003c\/strong\u003e: Fully boxed mild steel with internal gussets for added strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Caster Alignment\u003c\/strong\u003e: Ball joint location moved slightly forward to enhance alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Shock Compatibility\u003c\/strong\u003e: Pre-tabbed for dual 2.5\" diameter shocks; works with all aftermarket coil over shocks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUrethane Pivot Bushings\u003c\/strong\u003e: Reduces deflection compared to rubber bushings, providing a tighter steering feel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Maintenance\u003c\/strong\u003e: Zerk fittings allow for convenient lubrication of lower pivot bushings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Finish\u003c\/strong\u003e: Three-stage powder coat with a durable clear coat for long-lasting protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Setup\u003c\/strong\u003e: Compatible with factory Toyota ball joints or TC lower uniball conversion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional Information:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Compatible\u003c\/strong\u003e: With 4\"-7\" spindle\/drop bracket lifts.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHandcrafted in the U.S.A.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKit Contents:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Fully Boxed Mild Steel Lower Control Arms with Dual Shock Tabs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745604239723,"sku":"97555-E","price":2192.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/97555-E_acef4119-ea76-4213-9014-a37544ab0266.jpg?v=1734534046"},{"product_id":"2004-2007-1st-gen-sequoia-expedition-series-stock-length-lower-control-arms","title":"2004-2007 1st Gen Sequoia Expedition Series Stock Length Lower Control Arms","description":"Complete stock replacement lower control arm upgrade for the 2004-2007 Sequoia. For model years 2001-2003 use part number 97555-E.\u003cbr\u003e\u003cbr\u003e\n Fully boxed mild steel construction features internal gussets for added strength.\u003cbr\u003e\u003cbr\u003e\n Lower ball joint location moved slightly forward to increase caster for alignment.\u003cbr\u003e\u003cbr\u003e\n Lower shock tabs are designed to work with all brand aftermarket coil over shocks.\u003cbr\u003e\u003cbr\u003e\n Lower control arms are pre-tabbed for dual 2.5\" diameter shock capability.\u003cbr\u003e\u003cbr\u003e\n Compatible with a factory Toyota ball joints or can be installed with the TC lower uniball conversion.\u003cbr\u003e\u003cbr\u003e\n Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel.\u003cbr\u003e\u003cbr\u003e\n Zerk fittings allow for easy maintenance on the lower pivot bushings.\u003cbr\u003e\u003cbr\u003e\n Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e\n Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e\n NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\n\u003ca data-lightbox=\"parts\" class=\"example-image-link\" href=\"..\/images\/product\/97554-E\/parts_list.png\"\u003e\u003cimg src=\"..\/images\/product\/97554-E\/parts_list.png\" width=\"500px\"\u003e\u003c\/a\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745604305259,"sku":"97554-E","price":2192.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/97554-E_7c4671bb-2549-4bcf-bb38-fe3cc9786183.jpg?v=1734534049"},{"product_id":"2008-2021-200-series-land-cruiser-stock-lower-control-arms","title":"2008-2021 200 Series Land Cruiser Stock Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e \n Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e \n Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e \n Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e \n Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e \n 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e \n Stock length replacement lower A-arm - SINGLE SHOCK ONLY.\u003cbr\u003e\u003cbr\u003e \n Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e \n Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e \n NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745606959467,"sku":"87505-E","price":3477.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/87505-E.jpg?v=1734534108"},{"product_id":"2010-2023-gx460-expedition-series-stock-length-lower-control-arms","title":"2010-2023 GX460 Expedition Series Stock Length Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e \n Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e \n KDSS mounts on the lower control arm re-use factory Toyota hardware for ease of installation.\u003cbr\u003e\u003cbr\u003e \n Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e \n Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e \n Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e \n 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e \n Stock length replacment lower A-arm dual shock capable.\u003cbr\u003e\u003cbr\u003e \n Secondary shock mount tabs allow a bypass shock to be added for maximum tunability. Dual shock configurations will require TC shock hoop PT 86610.\u003cbr\u003e\u003cbr\u003e \n NOT COMPATIBLE with ICON S2 secondary shock system. \u003cbr\u003e\u003cbr\u003e \n All dual shock lower control arms require a 1.25\" wheel spacer to keep the tire from hitting the second shock mount at full steering lock even if you do not have a secondary shock installed.\u003cbr\u003e\u003cbr\u003e \n Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e \n Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e \n NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745607188843,"sku":"86555-E-10FJ-KDSS","price":2339.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-10FJ-KDSS_922b07a3-9e40-4f48-aa22-8abd904ad061.jpg?v=1734534118"},{"product_id":"2010-2023-gx460-expedition-series-stock-length-single-shock-lower-control-arms","title":"2010-2023 GX460 Expedition Series Stock Length Single Shock Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e \n Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e \n KDSS mounts on the lower control arm re-use factory Toyota hardware for ease of installation.\u003cbr\u003e\u003cbr\u003e \n Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e \n Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e \n Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e \n 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e \n Stock length replacement lower A-arm - SINGLE SHOCK ONLY.\u003cbr\u003e\u003cbr\u003e \n Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e \n Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e \n NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745607221611,"sku":"86555-E-10FJ-KDSS-NSS","price":2339.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-10FJ-KDSS-NSS_fffb3817-fc01-4e3e-85ed-db412f35138d.jpg?v=1734534119"},{"product_id":"2003-2009-gx470-expedition-series-stock-length-lower-control-arms","title":"2003-2009 GX470 Expedition Series Stock Length Lower Control Arms","description":"\u003cp\u003eThese stock-length dual shock lower control arms are engineered for maximum performance and durability, featuring \u003cstrong\u003elightweight construction\u003c\/strong\u003e, \u003cstrong\u003emaximum ground clearance\u003c\/strong\u003e, and a \u003cstrong\u003efully rebuildable design\u003c\/strong\u003e. Constructed from \u003cstrong\u003e4130 chromoly fully boxed laser-cut plates\u003c\/strong\u003e with internal gussets, they deliver superior strength while maintaining a low profile.\u003c\/p\u003e\n\u003cp\u003eThe arms include \u003cstrong\u003ebillet CNC-machined uniball cups\u003c\/strong\u003e with 1\" stainless steel uniballs, providing greater articulation and strength compared to factory ball joints. Coilover shock tab pockets enhance clearance, supporting a wider range of shocks up to 3.0\" diameter and ensuring compatibility with all aftermarket brands. Secondary shock mount tabs enable bypass shock installation for \u003cstrong\u003emaximum tunability\u003c\/strong\u003e (requires TC shock hoop PT 86610).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUrethane pivot bushings\u003c\/strong\u003e reduce deflection for a tighter steering feel, while \u003cstrong\u003ezerk fittings\u003c\/strong\u003e simplify maintenance. Integrated steering stop tabs preserve factory turning angles. Note: all dual shock setups require a \u003cstrong\u003e1.25\" wheel spacer\u003c\/strong\u003e to prevent tire interference with the second shock mount, even if a secondary shock is not installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight, durable construction with maximum ground clearance.\u003c\/li\u003e\n\u003cli\u003e4130 chromoly fully boxed plates with internal gussets.\u003c\/li\u003e\n\u003cli\u003eBillet CNC-machined uniball cups with 1\" stainless steel uniballs for strength and articulation.\u003c\/li\u003e\n\u003cli\u003eCoilover shock tab pockets for clearance, compatible with shocks up to 3.0\".\u003c\/li\u003e\n\u003cli\u003eSecondary shock mount tabs for bypass shock installation (requires TC shock hoop PT 86610).\u003c\/li\u003e\n\u003cli\u003eUrethane pivot bushings with zerk fittings for tighter steering and easy maintenance.\u003c\/li\u003e\n\u003cli\u003eIntegrated steering stop tabs maintain factory turning angles.\u003c\/li\u003e\n\u003cli\u003eThree-stage powder coat finish with durable clear coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with ICON S2 secondary shock system.\u003c\/li\u003e\n\u003cli\u003eNot compatible with 4\"-7\" spindle\/drop bracket lift kits.\u003c\/li\u003e\n\u003cli\u003eRequires 1.25\" wheel spacers for dual shock configurations.\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745608499563,"sku":"86555-E","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E_c1deb920-161f-44d5-b4a4-c3cbf8ebed4b.jpg?v=1734534176"},{"product_id":"2003-2009-gx470-expedition-series-stock-length-single-shock-lower-control-arms","title":"2003-2009 GX470 Expedition Series Stock Length Single Shock Lower Control Arms","description":"\u003cp\u003eLightweight and fully rebuildable, these stock-length lower control arms are designed for \u003cstrong\u003emaximum ground clearance\u003c\/strong\u003e and durability. Made from \u003cstrong\u003e4130 chromoly fully boxed laser-cut plates\u003c\/strong\u003e with internal gussets, they deliver exceptional strength.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ebillet CNC-machined uniball cup\u003c\/strong\u003e houses a 1\" stainless steel uniball for improved articulation and strength over factory ball joints. \u003cstrong\u003eUrethane pivot bushings\u003c\/strong\u003e offer a tighter steering feel and reduced deflection, with zerk fittings for easy maintenance. Coilover shock tab pockets maximize clearance, accommodating aftermarket shocks up to 3.0\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight, durable construction with maximum ground clearance.\u003c\/li\u003e\n\u003cli\u003e4130 chromoly plates with internal gussets for strength.\u003c\/li\u003e\n\u003cli\u003e1\" stainless steel uniball for greater articulation and strength.\u003c\/li\u003e\n\u003cli\u003eUrethane pivot bushings with zerk fittings for easy maintenance.\u003c\/li\u003e\n\u003cli\u003eCompatible with shocks up to 3.0\".\u003c\/li\u003e\n\u003cli\u003eThree-stage powder coat with a durable clear coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStock-length design for \u003cstrong\u003esingle shock only\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNot compatible with 4\"-7\" spindle\/drop bracket lift kits.\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745608532331,"sku":"86555-E-NSS","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-NSS_f0345823-48b9-4c46-a69d-4ea514404140.jpg?v=1734534179"},{"product_id":"2003-2009-gx470-expedition-series-stock-length-dual-shock-lower-control-arms","title":"2003-2009 GX470 Expedition Series Stock Length Dual Shock Lower Control Arms","description":"\u003cp\u003eUpgrade your suspension with these stock-length dual shock lower control arms, designed for maximum strength, articulation, and tunability. Engineered from \u003cstrong\u003e4130 chromoly fully boxed laser-cut plates\u003c\/strong\u003e with internal gussets, these lightweight arms provide \u003cstrong\u003emaximum ground clearance\u003c\/strong\u003e and are fully rebuildable.\u003c\/p\u003e\n\u003cp\u003eThe arms feature \u003cstrong\u003ebillet CNC-machined uniball cups\u003c\/strong\u003e with 1\" stainless steel uniballs, offering greater articulation and strength compared to factory ball joints. Secondary shock mount tabs allow for the addition of a bypass shock, providing unmatched dampening control and tunability (requires TC shock hoop PT 86610). Integrated steering stop tabs maintain factory turning angles, and \u003cstrong\u003eurethane pivot bushings\u003c\/strong\u003e with zerk fittings reduce deflection while offering easy maintenance and tighter steering response.\u003c\/p\u003e\n\u003cp\u003eDesigned for compatibility with \u003cstrong\u003eall aftermarket shock brands\u003c\/strong\u003e (up to 3.0\" diameter), these arms include coilover shock tab pockets for improved clearance. KDSS mounts reuse factory hardware for a straightforward installation. Note: all dual shock setups require a 1.25\" wheel spacer to prevent tire interference with the second shock mount at full steering lock, even if a secondary shock is not installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight, durable design with maximum ground clearance.\u003c\/li\u003e\n\u003cli\u003eFully boxed 4130 chromoly plates with internal gussets for added strength.\u003c\/li\u003e\n\u003cli\u003eCompatible with all aftermarket shocks up to 3.0\" diameter.\u003c\/li\u003e\n\u003cli\u003eBillet CNC-machined uniball cups with 1\" stainless steel uniballs for superior articulation and strength.\u003c\/li\u003e\n\u003cli\u003eSecondary shock mount tabs for bypass shock installation (requires TC shock hoop PT 86610).\u003c\/li\u003e\n\u003cli\u003eUrethane pivot bushings with zerk fittings for reduced deflection and easier maintenance.\u003c\/li\u003e\n\u003cli\u003eIntegrated steering stop tabs retain factory turning angles.\u003c\/li\u003e\n\u003cli\u003eThree-stage powder coat finish with durable clear coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with ICON S2 secondary shock system.\u003c\/li\u003e\n\u003cli\u003eNot compatible with 4\"-7\" spindle\/drop bracket lift kits.\u003c\/li\u003e\n\u003cli\u003eDual shock setups require 1.25\" wheel spacers to avoid tire interference.\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745608565099,"sku":"86555-E-KDSS","price":2462.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-KDSS.jpg?v=1734534181"},{"product_id":"2008-2021-lx570-stock-lower-control-arms","title":"2008-2021 LX570 Stock Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e Stock length replacement lower A-arm - SINGLE SHOCK ONLY.\u003cbr\u003e\u003cbr\u003e Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\n\u003cimg src=\"..\/images\/product\/87505-E\/parts_list.png\" width=\"500px\"\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745609777515,"sku":"87505-E","price":3477.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/87505-E_35ee0afe-e31f-4b04-894d-8f74665ffc87.jpg?v=1734534259"},{"product_id":"2010-2022-prado-150-expedition-series-stock-length-single-shock-lower-control-arms","title":"2010-2022 Prado 150 Expedition Series Stock Length Single Shock Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e Stock length replacement lower A-arm - SINGLE SHOCK ONLY.\u003cbr\u003e\u003cbr\u003e Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\n\u003cimg src=\"..\/images\/product\/86555-E-10FJ-NSS\/parts_list.png\" width=\"500px\"\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745612497259,"sku":"86555-E-10FJ-NSS","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-10FJ-NSS_6492fb27-5f02-43ae-8420-a9d39013fd94.jpg?v=1734534362"},{"product_id":"2010-2022-prado-150-expedition-series-stock-length-lower-control-arms","title":"2010-2022 Prado 150 Expedition Series Stock Length Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e Stock length replacment lower A-arm dual shock capable.\u003cbr\u003e\u003cbr\u003e Secondary shock mount tabs allow a bypass shock to be added for maximum tunability. Dual shock configurations will require TC shock hoop PT 86610.\u003cbr\u003e\u003cbr\u003e NOT COMPATIBLE with ICON S2 secondary shock system. \u003cbr\u003e\u003cbr\u003e All dual shock lower control arms require a 1.25\" wheel spacer to keep the tire from hitting the second shock mount at full steering lock even if you do not have a secondary shock installed.\u003cbr\u003e\u003cbr\u003e Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\n\u003cimg src=\"..\/images\/product\/86555-E-10FJ\/parts_list.png\" width=\"500px\"\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745612530027,"sku":"86555-E-10FJ","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-10FJ_e5d83d5d-ace3-4973-b7df-dc454f1694a5.jpg?v=1734534364"},{"product_id":"2010-2022-prado-150-expedition-series-stock-length-single-shock-lower-control-arms-with-kdss","title":"2010-2022 Prado 150 Expedition Series Stock Length Single Shock Lower Control Arms with KDSS","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e KDSS mounts on the lower control arm re-use factory Toyota hardware for ease of installation.\u003cbr\u003e\u003cbr\u003e Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e Stock length replacement lower A-arm - SINGLE SHOCK ONLY.\u003cbr\u003e\u003cbr\u003e Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\n\u003cimg src=\"..\/images\/product\/86555-E-10FJ-KDSS-NSS\/parts_list.png\" width=\"500px\"\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745612562795,"sku":"86555-E-10FJ-KDSS-NSS","price":2339.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-10FJ-KDSS-NSS_ff7dff6f-6af2-452d-8d8f-c8e15958da82.jpg?v=1734534367"},{"product_id":"2010-2022-prado-150-expedition-series-stock-length-lower-control-arms-with-kdss","title":"2010-2022 Prado 150 Expedition Series Stock Length Lower Control Arms with KDSS","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e KDSS mounts on the lower control arm re-use factory Toyota hardware for ease of installation.\u003cbr\u003e\u003cbr\u003e Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e Stock length replacment lower A-arm dual shock capable.\u003cbr\u003e\u003cbr\u003e Secondary shock mount tabs allow a bypass shock to be added for maximum tunability. Dual shock configurations will require TC shock hoop PT 86610.\u003cbr\u003e\u003cbr\u003e NOT COMPATIBLE with ICON S2 secondary shock system. \u003cbr\u003e\u003cbr\u003e All dual shock lower control arms require a 1.25\" wheel spacer to keep the tire from hitting the second shock mount at full steering lock even if you do not have a secondary shock installed.\u003cbr\u003e\u003cbr\u003e Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\n\u003cimg src=\"..\/images\/product\/86555-E-10FJ-KDSS\/parts_list.png\" width=\"500px\"\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745612595563,"sku":"86555-E-10FJ-KDSS","price":2339.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-10FJ-KDSS_308208b0-ac63-42b3-b40c-659f2dfca022.jpg?v=1734534369"},{"product_id":"2003-2009-prado-120-expedition-series-stock-length-single-shock-lower-control-arms","title":"2003-2009 Prado 120 Expedition Series Stock Length Single Shock Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e Billet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e Stock length replacement lower A-arm - SINGLE SHOCK ONLY.\u003cbr\u003e\u003cbr\u003e Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\n\u003cimg src=\"..\/images\/product\/86555-E-NSS\/parts_list.png\" width=\"500px\"\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745616986475,"sku":"86555-E-NSS","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E-NSS_b8a888cb-bc4e-4e5b-9dac-dab6c8385f88.jpg?v=1734534437"},{"product_id":"2003-2009-prado-120-expedition-series-stock-length-lower-control-arms","title":"2003-2009 Prado 120 Expedition Series Stock Length Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e Pocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003cbr\u003e\u003cbr\u003e Billet CNC machined uniball cup houses a 1\" 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e Stock length replacment lower A-arm dual shock capable.\u003cbr\u003e\u003cbr\u003e Secondary shock mount tabs allow a bypass shock to be added for maximum tunability. Dual shock configurations will require TC shock hoop PT 86610.\u003cbr\u003e\u003cbr\u003e NOT COMPATIBLE with ICON S2 secondary shock system. \u003cbr\u003e\u003cbr\u003e All dual shock lower control arms require a 1.25\" wheel spacer to keep the tire from hitting the second shock mount at full steering lock even if you do not have a secondary shock installed.\u003cbr\u003e\u003cbr\u003e Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\n\u003cimg src=\"..\/images\/product\/86555-E\/parts_list.png\" width=\"500px\"\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745617052011,"sku":"86555-E","price":2315.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86555-E_36d35cad-f2ef-46b4-80a4-8bd79e3bc4fe.jpg?v=1734534439"},{"product_id":"1996-2002-prado-90-expedition-series-stock-length-lower-control-arms","title":"1996-2002 Prado 90 Expedition Series Stock Length Lower Control Arms","description":"\u003cp\u003eUpgrade your vehicle's suspension with these high-strength, fully boxed lower control arms, designed as a direct replacement for stock components. Handcrafted in the USA, these lower control arms are constructed from durable mild steel with internal gussets for added strength and longevity. The lower ball joint location is repositioned slightly forward to increase caster, optimizing alignment and improving handling. Designed to work with all brands of aftermarket coil-over shocks, the control arms also come pre-tabbed for dual 2.5\" shock compatibility, making them an excellent choice for off-road enthusiasts.\u003c\/p\u003e\n\u003cp\u003eThese control arms feature urethane pivot bushings to reduce deflection compared to rubber bushings, delivering a tighter and more responsive steering feel. Zerk fittings are included for easy lubrication and maintenance, while the three-stage powder coat with a clear coat ensures long-lasting durability and corrosion resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete replacement lower control arms, designed for superior strength and performance.\u003c\/li\u003e\n\u003cli\u003eFully boxed mild steel construction with internal gussets for added durability.\u003c\/li\u003e\n\u003cli\u003eLower ball joint location moved forward to improve caster for better alignment and handling.\u003c\/li\u003e\n\u003cli\u003eCompatible with factory Toyota ball joints or TC lower uniball conversion kits.\u003c\/li\u003e\n\u003cli\u003ePre-tabbed for dual 2.5\" diameter shocks and designed to work with all aftermarket coil-over shocks.\u003c\/li\u003e\n\u003cli\u003eUrethane pivot bushings reduce deflection for a tighter steering feel.\u003c\/li\u003e\n\u003cli\u003eZerk fittings allow for easy lubrication and maintenance.\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA with a durable three-stage powder coat finish, including a clear coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with 4\"-7\" spindle\/drop bracket lift kits.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745617936747,"sku":"96555-E","price":2116.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/96555-E_52f51a44-259a-4d44-8082-1385cb57086b.jpg?v=1734534491"},{"product_id":"2008-2021-2nd-gen-sequoia-stock-length-lower-control-arms","title":"2008-2021 2nd Gen Sequoia Stock Length Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on. \u003cbr\u003e\u003cbr\u003e Will work with all aftermarket brand shocks.\u003cbr\u003e\u003cbr\u003e Only upper control arm on the market that allows a 3.0\" diameter coilover shock to be installed with no contact.\u003cbr\u003e\u003cbr\u003e Billet CNC machined uniball cup houses a 1\" 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e 4130 chromoly laser cut plates are fully boxed and include internal gussets. \u003cbr\u003e\u003cbr\u003e Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\n\u003cimg src=\"..\/images\/product\/87555-R\/parts_list.png\" width=\"500px\"\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745620984171,"sku":"87555-R","price":3389.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/87555-R_ff9e99e4-98a1-43fb-9dfc-eef53e427f1b.jpg?v=1734534539"},{"product_id":"2022-3rd-gen-tundra-stock-length-lower-control-arms","title":"2022+ 3rd Gen Tundra Stock Length Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on.\u003cbr\u003e\u003cbr\u003e\n \n Will work with all aftermarket brand shocks, up to a 3.0\" \u003cbr\u003e\u003cbr\u003e\n \n Billet CNC machined uniball cup houses a 1\" 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e\n \n Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e\n \n Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel.\u003cbr\u003e\u003cbr\u003e\n Zerk fittings allow for easy urethane bushing maintenance.\u003cbr\u003e\u003cbr\u003e\n \n 4130 chromoly laser cut plates are fully boxed and include internal gussets.\u003cbr\u003e\u003cbr\u003e\n \n Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e\n \n Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e\n NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\n","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745622557035,"sku":"87525-E","price":3301.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/87525-E.jpg?v=1734534573"},{"product_id":"2022-current-300-series-land-cruiser-stock-length-lower-control-arms","title":"2022+ 300 Series Land Cruiser Stock Length Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on.\u003cbr\u003e\u003cbr\u003e\n Will work with all aftermarket brand shocks, up to a 3.0\" \u003cbr\u003e\u003cbr\u003e\n Billet CNC machined uniball cup houses a 1\" 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e\n Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e\n Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel.\u003cbr\u003e\u003cbr\u003e \n Zerk fittings allow for easy urethane bushing maintenance.\u003cbr\u003e\u003cbr\u003e\n 4130 chromoly laser cut plates are fully boxed and include internal gussets.\u003cbr\u003e\u003cbr\u003e\n Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e\n Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e\n NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\n\u003ca data-lightbox=\"parts\" class=\"example-image-link\" href=\"..\/images\/product\/89555-E\/parts_list.png\"\u003e\u003cimg src=\"..\/images\/product\/89555-E\/parts_list.png\" width=\"500px\"\u003e\u003c\/a\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745622819179,"sku":"89555-E","price":3514.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/89555-E.jpg?v=1734534588"},{"product_id":"2022-current-lx600-stock-length-lower-control-arms","title":"2022+ LX600 Stock Length Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on.\u003cbr\u003e\u003cbr\u003e\n Will work with all aftermarket brand shocks, up to a 3.0\" \u003cbr\u003e\u003cbr\u003e\n Billet CNC machined uniball cup houses a 1\" 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e\n Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e\n Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel.\u003cbr\u003e\u003cbr\u003e \n Zerk fittings allow for easy urethane bushing maintenance.\u003cbr\u003e\u003cbr\u003e\n 4130 chromoly laser cut plates are fully boxed and include internal gussets.\u003cbr\u003e\u003cbr\u003e\n Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e\n Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e\n NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\n\u003ca data-lightbox=\"parts\" class=\"example-image-link\" href=\"..\/images\/product\/89555-E\/parts_list.png\"\u003e\u003cimg src=\"..\/images\/product\/89555-E\/parts_list.png\" width=\"500px\"\u003e\u003c\/a\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745623081323,"sku":"89555-E","price":3514.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/89555-E_67b224d4-ed46-4429-9db7-f8da7357c2da.jpg?v=1734534603"},{"product_id":"2023-current-3rd-gen-sequoia-stock-length-lower-control-arms","title":"2023+ 3rd Gen Sequoia Stock-Length Lower Control Arms","description":"Light weight. Maximum ground clearance. Fully rebuildable. Bolt on.\u003cbr\u003e\u003cbr\u003e\n \n Will work with all aftermarket brand shocks, up to a 3.0\" \u003cbr\u003e\u003cbr\u003e\n \n Billet CNC machined uniball cup houses a 1\" 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003e\n \n Integrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003e\n \n Urethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel.\u003cbr\u003e\u003cbr\u003e\n Zerk fittings allow for easy urethane bushing maintenance.\u003cbr\u003e\u003cbr\u003e\n \n 4130 chromoly laser cut plates are fully boxed and include internal gussets.\u003cbr\u003e\u003cbr\u003e\n \n Three stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003e\n \n Hand crafted in the U.S.A.\u003cbr\u003e\u003cbr\u003e\n NOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\n","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745624031595,"sku":"87525-E","price":3301.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/87525-E_efe7815b-529a-4489-a064-01c89bd5524b.jpg?v=1734534653"},{"product_id":"2024-4th-gen-tacoma-stock-length-lower-control-arms","title":"2024+ 4th Gen Tacoma Stock-Length Lower Control Arms","description":"\u003cp class=\"x_MsoNormal\"\u003e\u003cspan\u003eLight weight. Maximum ground clearance compared to stock units. Fully rebuildable. 100% Bolt-on.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp class=\"x_MsoNormal\"\u003e\u003cspan\u003eIncreased caster added. Lower uniball moved forward 1\/4 inch for better overall handling.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cbr\u003eBillet CNC machined uniball cup houses a 1 inch 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003cbr\u003e\u003cbr\u003eIntegrated steering stop tabs retain factory turning angles.\u003cbr\u003e\u003cbr\u003eUrethane pivot bushings reduce deflection compared to a rubber bushing offering a tighter steering feel. Zerk fittings allow for easy maintenance.\u003cbr\u003e\u003cbr\u003e4130 chromoly laser cut plates are fully boxed and include internal gussets.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp class=\"x_MsoNormal\"\u003e\u003cspan\u003eBump stop strike pad included. Optional weld on bump stop accessory is available \u003c\/span\u003e\u003cspan\u003ePT#86524-E-BUMP \u003c\/span\u003e\u003cspan\u003eKit includes DuroBump rubber bump stops.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp class=\"x_MsoNormal\"\u003e\u003cspan\u003eRecessed jack point integrated into arm bottom plate.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cbr\u003eSingle shock capability while retaining factory sway bar mounting location.\u003cbr\u003e\u003cbr\u003eThree stage powder coat includes a durable clear coat.\u003cbr\u003e\u003cbr\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e","brand":"Total Chaos Fabrication","offers":[{"title":"Default Title","offer_id":51745624326507,"sku":"86524-E","price":2779.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/86524-E.jpg?v=1734534667"}],"url":"https:\/\/www.srqfabrications.com\/collections\/total-chaos-lower-control-arms.oembed?page=2","provider":"SRQ Fabrications","version":"1.0","type":"link"}