{"title":"Exterior","description":"","products":[{"product_id":"1996-2002-4runner-tire-carrier-swingout-diy-kit","title":"1996-2002 4Runner Tire Carrier Swingout - DIY Kit","description":"\u003cp\u003e\u003cstrong\u003e\u003cu\u003eInfo to know before you order:\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHIS IS A DIY (DO IT YOURSELF) KIT!\u003c\/strong\u003e It is shipped as multiple pieces and the customer welds it themselves.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThere may be small imperfections on the surfaces of the parts, such as small areas of surface rust or shallow scratches caused during the manufacturing or shipping processes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThis listing is so you can order the swingout separate from the rear bumper and install it at a later time. You can also order it as an option with the rear bumper (will be discounted $40 due to not having to ship separately).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThis swingout tire carrier was designed specifically for our 1996 to 2002 Toyota 4runner rear bumper. There is no guarantee in fitment on any other company’s bumper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eA little about the swingout:\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMax recommended tire size is 35\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eWheel bolt pattern is 6x5.5 with M12x1.50 studs. Lug nuts not includded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLicense plate will need to be relocated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe square tubing connecting the wheel mounting plate to the swingout is cut oversized and is adjustable. So depending on your wheel offset you can cut it to the length you need. It can also be angled to your preferred position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMaterials: The hinge brackets, wheel mounting plate, and swingout wheel support plate \u0026amp; braces are 1\/4\" hrpo steel. The latch bracket and logo brace are 3\/16\" hrpo steel. Round tubing is 1.75\" OD x 11 gauge ERW. Square tubing is 2.5x2.5x3\/16.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eHinge is a dual shear design. Main pin is a 3\/4\" alloy steel shoulder bolt (stronger than grade 8). Uses oil embedded high load flanged sleeve bushings. The outer tube that the swingout welds too is 1.75\" OD x 3\/8\" wall DOM tubing. Mounts to the bumper using six 1\/2\" alloy steel bolts or can be welded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLatch has a 2000 lb holding capacity and safety lock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eT-handle spring plunger offers added security and locks swingout in the closed position. Also, locks swing out when opened to 100°.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSwingout weight including latch, hinge, and all hardware is around 40 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/REAR_TIRE_CARRIER_SWINGOUT.pdf?v=1734534619\"\u003eRear Tire Carrier Swingout Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"True North Fabrications","offers":[{"title":"Default Title","offer_id":44519775535426,"sku":"TNF1010","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/true-north-fabrications-exterior-default-title-96-02-4runner-tire-carrier-swingout-diy-kit-40596976435522.jpg?v=1695221426"},{"product_id":"1996-2002-3rd-gen-4runner-brake-light-cover","title":"1996-2002 3rd Gen 4Runner Brake Light Cover","description":"\u003cp\u003eCustom 3rd brake light cover that attaches to your spoiler and allows your brake light to display either Toyota or TRD when on.\u003cbr\u003e\u003cbr\u003eMust have a spoiler!\u003c\/p\u003e\n\u003cp\u003eComes primed and ready for paint\u003c\/p\u003e\n\u003cp\u003eMounting hardware and instructions are included.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/3RD_BRAKE_LIGHT_COVER.pdf?v=1734534618\"\u003e3rd Brake Light Cover Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"True North Fabrications","offers":[{"title":"TRD","offer_id":44582402130242,"sku":"TNF1054","price":49.95,"currency_code":"USD","in_stock":true},{"title":"Toyota","offer_id":44582402163010,"sku":"TNF1055","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/true-north-fabrications-exterior-trd-3rd-gen-brake-light-cover-40622092058946.jpg?v=1695221502"},{"product_id":"1996-2002-3rd-gen-4runner-diy-grille-kit","title":"1996-2002 3rd Gen 4Runner Fog Light Grille","description":"\u003cp\u003eThe first 3rd Gen 4runner grille of its kind! Laser-cut out of 16 gauge HRPO steel.\u003c\/p\u003e\n\u003cp\u003eYou have the option to have cutouts for two LED cube lights, which provide both a killer look and extra light output for those night time trail rides! The parts are cleaned and primed to avoid rust during handling.\u003c\/p\u003e\n\u003cp\u003eYou will need to cut a 96-98 4runner stock grille and mount the mesh inside the grille yourself unless you select the surround option.\u003c\/p\u003e\n\u003cp\u003eYou can choose the options for a standard insert with no cutouts or an insert with cutouts, brackets, and 20w cube fog lights included.\u003c\/p\u003e\n\u003cp\u003eMounting hardware and instructions are included.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/DIY_GRILLE_KIT.pdf?v=1734534618\"\u003eDIY Grille Kit Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"True North Fabrications","offers":[{"title":"Default Title","offer_id":44582405243202,"sku":"TNF1077","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/true-north-fabrications-exterior-default-title-diy-grille-kit-40622097891650.jpg?v=1695221569"},{"product_id":"1996-2002-3rd-gen-4runner-flush-grille","title":"1996-2002 3rd Gen 4Runner Flush Grille","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eA handbuilt custom flush mesh grille for 96-02 3rd Gen 4Runners. With mesh, emblem, lighting, and surround color options, you can make your grille stand out from the others!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePAINT OPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf you selected the custom TRD stripes option, please enter the colors you'd like in the text field\u003c\/li\u003e\n\u003cli\u003eIf you selected the color match paint option, please enter your paint code in the text field. This can be found inside the driver door jam. Feel free to reach out if you have any questions regarding how to locate your paint code.\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e**3rd Gen 4Runners are 20-year-old vehicles, the paint on your truck may have faded over time or been repainted. We paint to the exact paint code of the truck when it left the factory, not to how your truck looks 20 years later, please keep this in mind when selecting this option**\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eOTHER NOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese grilles are not machine-built. Please be aware of this when ordering and setting expectations for the product. This is an aftermarket product, not an OEM grille.\u003c\/li\u003e\n\u003cli\u003eMinor modifications of the mounting points on the grille may be needed (on select 4Runners) so that the grille fits easily onto the truck. We recommend using a dremel or file if this applies to you.\u003c\/li\u003e\n\u003cli\u003eThis item is a built-to-order item\u003c\/li\u003e\n\u003cli\u003eAll emblem options are OEM Toyota Emblems\u003c\/li\u003e\n\u003cli\u003eHigh-quality SEM black paint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHOTOS\/OPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRaptor Mesh, White Toyota Lettering, TRD Stripes\u003c\/li\u003e\n\u003cli\u003eRaptor Mesh, White Toyota Lettering, Large Raptor Lights, TRD Stripes\u003c\/li\u003e\n\u003cli\u003eBase Mesh, White Toyota Lettering, Raptor Lights\u003c\/li\u003e\n\u003cli\u003eRaptor Mesh, White Toyota Lettering, Raptor Lights\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"SRQ Fabrications","offers":[{"title":"Default Title","offer_id":44582410518850,"sku":"SRQ1006","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/srq-fabrications-exterior-default-title-96-02-3rd-gen-4runner-flush-grille-40622102643010.png?v=1695221603"},{"product_id":"06-09-4th-gen-4runner-mesh-grille","title":"2006-2009 4th Gen 4Runner Mesh Grille","description":"\u003cp\u003eA handbuilt custom flush mesh grille for 06-09 4th Gen 4Runners. With emblem, lighting, and surround color options, you can make your grille stand out from the others!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePAINT OPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf you selected the custom TRD stripes option, please enter the colors you'd like in the text field\u003c\/li\u003e\n\u003cli\u003eIf you selected the color match paint option, please enter your paint code in the text field. This can be found inside the driver door jam. Feel free to reach out if you have any questions regarding how to locate your paint code.\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e**4th Gen 4Runners are now 15-year-old vehicles, the paint on your truck may have faded over time or been repainted. We paint to the exact paint code of the truck when it left the factory, not to how your truck looks 15 years later, please keep this in mind when selecting this option**\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOTHER NOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese grilles are not machine-built. Please be aware of this when ordering and setting expectations for the product. This is an aftermarket product, not an OEM grille.\u003c\/li\u003e\n\u003cli\u003eThis item is a built-to-order item\u003c\/li\u003e\n\u003cli\u003eAll emblem options are OEM Toyota Emblems\u003c\/li\u003e\n\u003cli\u003eHigh-quality black paint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SRQ Fabrications","offers":[{"title":"Default Title","offer_id":44582411927874,"sku":"SRQ1007","price":389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/srq-fabrications-exterior-default-title-06-09-4th-gen-4runner-mesh-grille-40622104609090.jpg?v=1695221660"},{"product_id":"98-00-1st-gen-tacoma-mesh-grille","title":"1998-2000 1st Gen Tacoma Mesh Grille","description":"\u003cp\u003eA handbuilt custom flush mesh grille for 98-00 1st Gen Toyota Tacomas. With emblem, lighting, and surround color options, you can make your grille stand out from the others!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePAINT OPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf you selected the custom TRD stripes option, please enter the colors you'd like in the text field\u003c\/li\u003e\n\u003cli\u003eIf you selected the colormatch paint option, please enter your paint code in the text field. This can be found inside the driver door jam. Feel free to reach out if you have any questions regarding how to locate your paint code.\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e**1st gen Tacomas are now 20 year old vehicles, the paint on your truck may have faded over time or been repainted. We paint to the exact paint code of the truck when it left the factory, not to how your truck looks 20 years later, please keep this in mind when selecting this option**\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOTHER NOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese grilles are not machine built. Please be aware of this when ordering and setting expectations for the product. This is an aftermarket product, not an OEM grille.\u003c\/li\u003e\n\u003cli\u003eThis item is a built to order item\u003c\/li\u003e\n\u003cli\u003eAll emblem options are OEM Toyota Emblems\u003c\/li\u003e\n\u003cli\u003eHigh quality SEM black paint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SRQ Fabrications","offers":[{"title":"Default Title","offer_id":44582412353858,"sku":"96803","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/srq-fabrications-exterior-default-title-98-00-1st-gen-tacoma-mesh-grille-40622104969538.jpg?v=1695221660"},{"product_id":"01-04-1st-gen-tacoma-mesh-grille","title":"2001-2004 1st Gen Tacoma Mesh Grille","description":"\u003cp\u003eA handbuilt custom flush mesh grille for 01-04 1st Gen Toyota Tacomas. With emblem, lighting, and surround color options, you can make your grille stand out from the others!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePAINT OPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf you selected the custom TRD stripes option, please enter the colors you'd like in the text field\u003c\/li\u003e\n\u003cli\u003eIf you selected the colormatch paint option, please enter your paint code in the text field. This can be found inside the driver door jam. Feel free to reach out if you have any questions regarding how to locate your paint code.\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e**1st gen Tacomas are now 20 year old vehicles, the paint on your truck may have faded over time or been repainted. We paint to the exact paint code of the truck when it left the factory, not to how your truck looks 20 years later, please keep this in mind when selecting this option**\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOTHER NOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese grilles are not machine built. Please be aware of this when ordering and setting expectations for the product. This is an aftermarket product, not an OEM grille.\u003c\/li\u003e\n\u003cli\u003eThis item is a built to order item\u003c\/li\u003e\n\u003cli\u003eAll emblem options are OEM Toyota Emblems\u003c\/li\u003e\n\u003cli\u003eHigh quality SEM black paint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SRQ Fabrications","offers":[{"title":"Default Title","offer_id":44582412845378,"sku":"96804","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/1st_gen_tacoma_grille.jpg?v=1781802736"},{"product_id":"mcneil-03-09-4runner-4-fiberglass-fenders","title":"2003-2009 4Runner McNeil 4\" Bulge Race Style Fiberglass Fenders","description":"\u003cp\u003eOur 2003-2009 Toyota 4 Runner fenders are a great addition to trucks with serious suspension, as seen on Sherpa Motorsports Ultra 4 race vehicle. This is a simple bolt on fiberglass fender featuring pre-marked (not pre-drilled) mounting locations for easy install. The wheel well is 2\" larger and 4\" wider than factory, making plenty of room for highly modified suspension + wheel and tire combos.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003e Features:\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUtilizes factory mounting locations\u003c\/li\u003e\n\u003cli\u003ePre-marked holes. (Drilling involved)\u003c\/li\u003e\n\u003cli\u003eFitment for up to 35\" tires\u003c\/li\u003e\n\u003cli\u003e4” wider flare than stock\u003c\/li\u003e\n\u003cli\u003e2” larger wheel well opening\u003c\/li\u003e\n\u003cli\u003eWorks with stock hood, headlights, grill and bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eModifications Required for Install\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSome trimming on the bumper is required to match the larger wheel well\u003c\/li\u003e\n\u003cli\u003eStock wheel well liners will not fit. (Custom extensions will need to take place)\u003c\/li\u003e\n\u003cli\u003eCustom Bottom mount near door is required for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eALL PARTS COME FINISHED IN A WHITE GEL COAT.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eALL PARTS MUST BE MOUNTED BEFORE ANY PAINTING TAKE PLACE\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice is for the pair\u003c\/strong\u003e\u003c\/p\u003e","brand":"McNeil Racing","offers":[{"title":"Default Title","offer_id":44539089355074,"sku":"T4-F-41","price":550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/SherpaMotorsports03-094runner3_2048x_bfd1d2e3-85d7-4e3c-a26f-736adde89382.webp?v=1754593550"},{"product_id":"mcneil-96-02-4runner-4-fiberglass-fenders","title":"1996-2002 4Runner 3\" Flare - Off Road Fiberglass Fenders","description":"\u003cp\u003eOur 96-01 + 4Runner fenders are a great addition to trucks with lift kits or mid travel kits. Subtle, yet just enough to set your truck apart. This is a simple bolt on fiberglass fender. The holes are premarked and you will have to drill your own holes in the fiberglass. The wheel well is larger than factory so stock wheel liners will not work. If you would like wheel well liners you will have to custom create your own. The fiberglass fenders will work with stock hood and stock headlights\u003c\/p\u003e\n\u003cp\u003eALL PARTS COME IN A WHITE GEL AND NOT PAINTED.\u003c\/p\u003e\n\u003cp\u003eALL PARTS HAVE TO BE MOUNTED BEFORE ANY PAINTING TAKE PLACE.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrice is for the pair Right and Left side\u003c\/li\u003e\n\u003cli\u003eBolts back to factory locations\u003c\/li\u003e\n\u003cli\u003ePre-marked holes. (Drilling involved)\u003c\/li\u003e\n\u003cli\u003e4” flare wider than stock per side\u003c\/li\u003e\n\u003cli\u003e2” larger wheel well opening\u003c\/li\u003e\n\u003cli\u003eWorks with stock hood and bumper\u003c\/li\u003e\n\u003cli\u003eSome trimming involved with bumper to allow larger wheel well\u003c\/li\u003e\n\u003cli\u003eStock wheel well liners will not fit. (custom extensions will need to take place)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"McNeil Racing","offers":[{"title":"Default Title","offer_id":44582515573058,"sku":"T4-F-31","price":650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/mcneil-racing-exterior-default-title-mcneil-96-02-4runner-4-fiberglass-fenders-40622155399490.jpg?v=1695221944"},{"product_id":"mcneil-96-04-tacoma-3-fiberglass-fenders","title":"1996-2004 Tacoma McNeil 3\" Bulge Off Road Fiberglass Fenders","description":"\u003cp\u003e\u003cspan\u003e1996-2004 Toyota Tacoma 3” Bulge Fiberglass Fender\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e25 day lead time from purchase date\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eShipping is not included in price\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*\u003cstrong\u003emounting bracket from the stock fenders can be drilled out and added to the fiberglass fender.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese are Mild and Simple fenders that are a great addition to your lifted or mid travel Tacoma. These are a 3 inch wider per side fender.  Made to bolt back into stock locations. Holes are pre-marked but not drilled out. You are allowed to use the same hardware that is from the stock fenders.  Fenders are made of Fiberglass Composite. \u003c\/span\u003e\u003cspan\u003eComes standard in semi-gloss white\u003c\/span\u003e\u003cspan\u003e gel coat finish.  All of our fiberglass parts are Hand Laid.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cb\u003eSPECIFICATIONS\u003c\/b\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003e-3 inches wider per side\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e-Bolts to factory locations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e-premarked holes (Drilling involved) \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e-Includes Driver and Passenger fender\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- works with stock hood\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e-Some Trimming involved with bumper to allow larger wheel well opening\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eTire Size\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eFlare size\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eRise\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e33”-35”\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e3” \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e3”\/2.5” Rise\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"McNeil Racing","offers":[{"title":"Default Title","offer_id":44539090108738,"sku":"TT-F-11","price":550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/mcneil-racing-exterior-default-title-mcneil-96-04-tacoma-3-fiberglass-fenders-40622155923778.jpg?v=1695221944"},{"product_id":"mcneil-07-13-tundra-4-fiberglass-fenders","title":"2007-2013 Tundra McNeil 4\" Bulge Fenders","description":"\u003cp\u003eOur 2007-2013 Toyota Tundra 4\" fenders are a great addition to trucks with mid-long travel suspension. This is a simple bolt on fiberglass fender featuring pre-marked (not pre-drilled) mounting locations for easy install. The wheel well is 2\" larger and 4\" wider than factory, making plenty of room for highly modified suspension + wheel and tire combos.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003e Features:\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUtilizes factory mounting locations\u003c\/li\u003e\n\u003cli\u003ePre-marked holes. (Drilling involved)\u003c\/li\u003e\n\u003cli\u003eFitment for up to 35\" tires\u003c\/li\u003e\n\u003cli\u003e4” wider flare than stock\u003c\/li\u003e\n\u003cli\u003e2” larger wheel well opening\u003c\/li\u003e\n\u003cli\u003eWorks with stock hood, headlights, grill and bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eModifications Required for Install\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSome trimming on the bumper is required to match the larger wheel well\u003c\/li\u003e\n\u003cli\u003eStock wheel well liners will not fit. (Custom extensions will need to take place)\u003c\/li\u003e\n\u003cli\u003eCustom Bottom mount near door is required for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eALL PARTS COME FINISHED IN A WHITE GEL COAT.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eALL PARTS MUST BE MOUNTED BEFORE ANY PAINTING TAKE PLACE\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice is for the pair\u003c\/strong\u003e\u003c\/p\u003e","brand":"McNeil Racing","offers":[{"title":"Default Title","offer_id":44539090305346,"sku":"TU-F-21","price":600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/mcneil-racing-exterior-default-title-mcneil-07-13-tundra-4-fiberglass-fenders-40622156087618.jpg?v=1695221946"},{"product_id":"mcneil-14-tundra-4-fiberglass-fenders","title":"2014+ Tundra McNeil 4\" Bulge Off Road Fiberglass Fenders","description":"\u003cp\u003eOur 14+ Toyota Tundra fenders are a great addition to trucks with lift kits or mid travel kits. This is a simple bolt on fiberglass fender. The holes are pre-marked and you will have to drill your own holes in the fiberglass. The wheel well is larger then factory so stock wheel liners will not work. If you would like wheel well liners you will have to custom create your own.  The fiberglass fenders will work with stock hood and stock headlights \u003c\/p\u003e\n\u003cp\u003eALL PARTS COME IN A WHITE GEL AND NOT PAINTED.\u003c\/p\u003e\n\u003cp\u003eALL PARTS HAVE TO BE MOUNTED BEFORE ANY PAINTING TAKE PLACE.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrice is for the pair Right and Left side\u003c\/li\u003e\n\u003cli\u003eBolts back to factory locations\u003c\/li\u003e\n\u003cli\u003ePre-marked holes. (Drilling involved)\u003c\/li\u003e\n\u003cli\u003e4” flare wider then stock per side\u003c\/li\u003e\n\u003cli\u003e2” larger wheel well opening\u003c\/li\u003e\n\u003cli\u003eWorks with stock hood and bumper\u003c\/li\u003e\n\u003cli\u003eSome trimming involved with bumper to allow larger wheel well\u003c\/li\u003e\n\u003cli\u003eStock wheel well liners will not fit. (custom extensions will need to take place)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"McNeil Racing","offers":[{"title":"Default Title","offer_id":44539091648834,"sku":"TU-F-31","price":650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/mcneil-racing-exterior-default-title-mcneil-14-tundra-4-fiberglass-fenders-40622156808514.jpg?v=1695221955"},{"product_id":"prinsu-3rd-gen-4runner-full-roof-rack-96-02","title":"1996-2002 3rd Gen 4Runner Prinsu Full Roof Rack","description":"\u003cp\u003eOur T4R3 Full Rack fits years 1995–2002 and is a non-drill rack. We worked closely with 3M to find the best product that acts as an adhesive weld. This extreme strength will easily support a Rooftop Tent and whatever else you throw at it.\u003c\/p\u003e\u003cp\u003eProduct comes powder coated black with black anodized aluminum cross-bar extrusions. One cross bar will not be anodized. It is intended to sit behind the wind deflector.\u003c\/p\u003e\u003cp\u003eNoise reducing edge trim is included with the purchase of the rack. \u003c\/p\u003e","brand":"Prinsu","offers":[{"title":"Standard \/ None","offer_id":44582529401154,"sku":"PRI-3G4R-FR","price":980.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Black Oak LED 5W Flood\/Spot Combo Single Row Light Bar","offer_id":44582529466690,"sku":null,"price":1779.0,"currency_code":"USD","in_stock":true},{"title":"Light Bar Cutout \/ None","offer_id":44582529597762,"sku":null,"price":980.0,"currency_code":"USD","in_stock":true},{"title":"Light Bar Cutout \/ Black Oak LED 5W Flood\/Spot Combo Single Row Light Bar","offer_id":44582529663298,"sku":null,"price":1779.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/prinsu-roof-rack-none-none-none-prinsu-3rd-gen-4runner-full-roof-rack-96-02-40622161756482.jpg?v=1695222008"},{"product_id":"5th-gen-toyota-4runner-prinsu-roof-rack-full-non-drill-2010-2022","title":"2010-2024 5th Gen 4Runner Prinsu Roof Rack Full Non-Drill","description":"\u003cp\u003eThe 4Runner Roof Rack Full is a modular, adjustable, and completely bolt together full-length roof rack for 2010-2019 Toyota 4Runner. See also our 3\/4 length model.\u003cbr\u003e\u003cbr\u003eThe rack consists of 2 laser cut side rails constructed of 1\/4″ 5052 aluminum plate. These rails have 3 mounting tabs each that will allow you to bolt the rack into the 4 factory mounting holes and 3m Industrial Adhesive on each side of the roof.\u003c\/p\u003e\u003cp\u003eThe crossbars are made from a 1″ x 2″ aluminum extrusion that has 2 top facing T-slot channel, a fore and aft channel and 2 bottom facing channels. This offers numerous solutions for tie-down options, cargo security, and the addition of accessories such as tool mounts or lighting. All product will come in black. All assembly hardware comes in a black zinc finish so as to match a black paint or powder coat finish on the final product. All mounting hardware is either stainless steel or high-quality Zn plated. The rack also includes a 1\/8″ 5052 aluminum plate wind deflector to help with aerodynamics and prevent wind noise.\u003c\/p\u003e\u003cp\u003eThe rack is completely modular in that you choose how your rack is configured. Refer to the gallery for an example of standard configurations we have used based on different load sizes and weights. You can also choose the number of crossbars you assemble your rack with. The rack comes standard with 9 cross bars for cargo and 1 additional for mounting of a wind deflector, lightbar or combination of the two.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eWeight capacity of the racks varies based on the number of crossbars used and their configuration.\u003c\/p\u003e","brand":"Prinsu","offers":[{"title":"Default Title","offer_id":44582530187586,"sku":"PRI-5G4R-FRND","price":980.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/prinsu-exterior-default-title-5th-gen-toyota-4runner-prinsu-roof-rack-full-non-drill-2010-2022-40622162051394.jpg?v=1695222005"},{"product_id":"prinsu-4th-gen-4runner-full-roof-rack-03-09","title":"2003-2009 4th Gen 4Runner Prinsu Full Roof Rack","description":"\u003cp\u003eOur T4R4 Full Rack fits years 2003-2009 and is a non-drill rack. We worked closely with 3M to find the best product that acts as an adhesive weld. This extreme strength will easily support a Rooftop Tent and whatever else you throw at it.\u003c\/p\u003e\u003cp\u003eProduct comes powder coated black with black anodized aluminum cross-bar extrusions. One cross bar will not be anodized. It is intended to sit behind the wind deflector.\u003c\/p\u003e","brand":"Prinsu","offers":[{"title":"None","offer_id":44582531006786,"sku":"PRI-4G4R-FR","price":980.0,"currency_code":"USD","in_stock":true},{"title":"Standard","offer_id":44582531137858,"sku":null,"price":980.0,"currency_code":"USD","in_stock":true},{"title":"Light Bar Cutout","offer_id":44582531268930,"sku":null,"price":980.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/prinsu-exterior-none-none-none-prinsu-4th-gen-4runner-full-roof-rack-03-09-40622162379074.jpg?v=1695222007"},{"product_id":"03-4runner-body-mount-chop-bmc","title":"2003-2024 4Runner Body Mount Chop (BMC)","description":"\u003cp\u003eFits: 2003-2024 4Runners, 07-14 Fj Cruisers, GX470\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips within a 1-2 business days \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA set of 3\/16\" steel plates to body mount chop your 03+ 4Runner! Designed for optimal tire clearance without having to fully relocate your body mount. Easily clear larger tires for your next offroad adventure!\u003c\/p\u003e\n\u003cp\u003eDesigned for easy install for a local shop if you don't have a welder\/grinder handy!\u003c\/p\u003e\n\u003cp\u003eComes pre-bent and ready for install. Sold as a pair\u003c\/p\u003e","brand":"SRQ Fabrications","offers":[{"title":"Default Title","offer_id":44539128971586,"sku":"SRQ1029","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/BMC_03.jpg?v=1753193240"},{"product_id":"special-edition-prinsu-tacoma-cab-rack-w-intake-fitment-2005-2021","title":"2005-2021 Tacoma Cab Prinsu Special Edition Rack w\/ Intake Fitment","description":"\u003cp\u003eSpecial Edition T2\/T3 Cab Rack with Toyota Desert Air Intake Fitment - Cutout for 40\" Lightbars\u003c\/p\u003e","brand":"Prinsu","offers":[{"title":"None","offer_id":44582555615554,"sku":"PRI-23GTAC-SER","price":780.0,"currency_code":"USD","in_stock":true},{"title":"40\" Light Bar Cutout","offer_id":44582555648322,"sku":null,"price":780.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/prinsu-exterior-none-special-edition-prinsu-tacoma-cab-rack-w-intake-fitment-2005-2021-40622381007170.jpg?v=1695222335"},{"product_id":"prinsu-07-14-fj-cruiser-roof-rack","title":"2007-2014 FJ Cruiser Prinsu Roof Rack","description":"\u003cp\u003eWe worked closely with 3M to find the best product that acts as an adhesive weld. This extreme strength will easily support a Rooftop Tent and whatever else you throw at it.\u003c\/p\u003e\u003cp\u003eProduct comes powder coated black with black anodized aluminum cross-bar extrusions. One cross bar will not be anodized. It is intended to sit behind the wind deflector.\u003c\/p\u003e","brand":"Prinsu","offers":[{"title":"Default Title","offer_id":44582581698882,"sku":"PRI-FJ-R","price":1090.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/prinsu-exterior-default-title-prinsu-07-14-fj-cruiser-roof-rack-40622406598978.jpg?v=1695222602"},{"product_id":"96-02-3rd-gen-4runner-special-edition-flush-grille","title":"1996-2002 3rd Gen 4Runner Special Edition Flush Grille","description":"\u003cp\u003eA hand-built custom edition flush mesh grille for 96-02 3rd Gen 4Runners rocking Ivan Stewart themed stripes!\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOTHER NOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese grilles are not machine built. Please be aware of this when ordering and setting expectations for the product. This is an aftermarket product, not an OEM grille.\u003c\/li\u003e\n\u003cli\u003eMinor modifications of the mounting points on the grille may be needed (on select 4Runners) so that the grille fits easily onto the truck. We recommend using a dremel or file if this applies to you.\u003c\/li\u003e\n\u003cli\u003eThis item is a built to order item\u003c\/li\u003e\n\u003cli\u003eAll emblem options are OEM Toyota Emblems\u003c\/li\u003e\n\u003cli\u003eHigh quality SEM black paint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SRQ Fabrications","offers":[{"title":"Default Title","offer_id":44582593429826,"sku":"SRQ1041","price":359.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/srq-fabrications-exterior-default-title-96-02-3rd-gen-4runner-special-edition-flush-grille-40622478885186.png?v=1695222742"},{"product_id":"12-15-2nd-gen-tacoma-mesh-grille","title":"2012-2015 2nd Gen Tacoma Mesh Grille","description":"\u003cp\u003eA handbuilt custom flush mesh grille for 12-15 2nd Gen Tacomas. With emblem, lighting, and surround color options, you can make your grille stand out from the others!\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003ePAINT OPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf you selected the custom TRD stripes option, please enter the colors you'd like in the text field\u003c\/li\u003e\n\u003cli\u003eIf you selected the colormatch paint option, please enter your paint code in the text field. This can be found inside the driver door jam. Feel free to reach out if you have any questions regarding how to locate your paint code.\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e**2nd gen Tacoma trucks are getting up there in age and the paint on your truck may have faded over time or been repainted. We paint to the exact paint code of the truck when it left the factory, not to how your truck looks now, please keep this in mind when selecting this option**\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOTHER NOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese grilles are not machine built. Please be aware of this when ordering and setting expectations for the product. This is an aftermarket product, not an OEM grille.\u003c\/li\u003e\n\u003cli\u003eThis item is a built to order item\u003c\/li\u003e\n\u003cli\u003eAll emblem options are OEM Toyota Emblems\u003c\/li\u003e\n\u003cli\u003eHigh quality SEM black paint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"SRQ Fabrications","offers":[{"title":"Default Title","offer_id":44582611681602,"sku":"SRQ1045","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/srq-fabrications-exterior-none-none-none-12-15-2nd-gen-tacoma-mesh-grille-40622505034050.jpg?v=1711054630"},{"product_id":"03-05-4th-gen-4runner-trd-grille","title":"2003-2005 4th Gen 4Runner TRD Grille","description":"\u003cp\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cstrong\u003e\u003c\/strong\u003eA custom 2003-2005 4th Gen grille with a 3rd Gen Tacoma TRD Pro insert installed in the middle! With emblem color, lighting, and surround color options, you can make your grille stand out from the others! This grille does include the Toyota Emblem.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"background-color: initial;\"\u003eWe recommend reusing your factory OEM grille gasket on install or purchase a new gasket to go with the grille. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003ePAINT OPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf you selected the colormatch paint option, please enter your paint code in the text field. This can be found inside the driver door jam. Feel free to reach out if you have any questions regarding how to locate your paint code.\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e**4th Gen 4Runners are 15 year old vehicles, the paint on your truck may have faded over time or been repainted. We paint to the exact paint code of the truck when it left the factory, not to how your truck looks 15 years later, please keep this in mind when selecting this option**\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SRQ Fabrications","offers":[{"title":"Default Title","offer_id":44582615548226,"sku":"SRQ1046","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/03-05_4Runner_TRD_02.jpg?v=1753197096"},{"product_id":"06-09-4th-gen-4runner-trd-grille","title":"2006-2009 4th Gen 4Runner TRD Grille","description":"\u003cp\u003eA custom 2006-2009 4th Gen grille with a 3rd Gen Tacoma TRD Pro insert installed in the middle! With emblem color, lighting, and surround color options, you can make your grille stand out from the others! This grille does include the Toyota Emblem.\u003c\/p\u003e\n\u003cp\u003eIncludes new hardware to connect to your factory grille metal mounting bracket. We recommend reusing your factory OEM grille gasket during installation, or you can purchase a new gasket from Toyota. The OEM part number for the gasket is (53119-35020-C0)\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003ePAINT OPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf you selected the color match paint option, please enter your paint code in the text field. This can be found inside the driver door jam. Feel free to reach out if you have any questions regarding how to locate your paint code.  \u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e4th Gen 4Runners are 15-year-old vehicles, the paint on your truck may have faded over time or been repainted. We paint to the exact paint code of the truck when it left the factory, not to how your truck looks 15 years later, please keep this in mind when selecting this option**\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eColor match grilles are built to order and therefore can not be returned. \u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SRQ Fabrications","offers":[{"title":"Default Title","offer_id":44582620332354,"sku":"SRQ1047","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/06-09_4Runner_TRD_02.jpg?v=1753194239"},{"product_id":"07-21-2nd-gen-tundra-cbi-prinsu-crewmax-cab-rack","title":"2007-2021 2nd Gen Tundra CBI Prinsu Crewmax Cab Rack","description":"\u003cp\u003ePowder Coat is a Satin Black Textured Finish\u003c\/p\u003e\u003cdiv\u003e2nd Gen Toyota Tundra\u003c\/div\u003e\u003cp\u003eNoise reducing edge trim is included with the purchase of the rack\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThe Tundra Cabrac (CrewMax cab roof rack) is a modular, adjustable, and completely bolt together roof rack for 2000-2018 Toyota Tundras in the CrewMax configuration.\u003c\/p\u003e\u003cp\u003eThis rack requires drilling into the roof of your truck and consists of 2 laser cut side rails constructed of 3\/16″ 5052 aluminum plate. The crossbars are made from a 2″ x 1″ aluminum extrusion that has a top facing T-slot channel. This offers numerous solutions for tie-down options, cargo security, and the addition of accessories such as tool mounts or lighting. The rack comes shipped in black powder coat with black anodized crossbars. All assembly hardware comes in a black zinc finish so as to match a black paint or powder coat finish on the final product. The rack also includes a 1\/8″ 5052 aluminum plate wind deflector to help with aerodynamics and prevent wind noise. Options for integrating a light bar are available. See the Extras\/Add Ons page.\u003c\/p\u003e\u003cp\u003eThe rack is completely modular in that you choose how your rack is configured. Refer to the gallery for an example of standard configurations we have used based on different load sizes and weights. You can also choose the number of crossbars you assemble your rack with. The rack comes standard with 6 cross bars for cargo and 1 additional for mounting of a wind deflector, lightbar or combination of the two.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eWeight capacity of the racks varies based on the number of crossbars used and their configuration. We expect all consumers to use good judgment and common sense with the loads they plan to carry using these rack systems.\u003c\/em\u003e\u003c\/p\u003e","brand":"CBI Offroad","offers":[{"title":"Standard","offer_id":44582640582978,"sku":"96857","price":1020.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 50\" Lightbars","offer_id":44582640615746,"sku":"96857","price":1020.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 40\" Lightbars","offer_id":44582640648514,"sku":"96857","price":1020.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-standard-07-21-2nd-gen-tundra-cbi-prinsu-crewmax-cab-rack-40622581416258.jpg?v=1695223481"},{"product_id":"07-21-2nd-gen-tundra-cbi-prinsu-top-rack-5-5-bed","title":"2007-2021 2nd Gen Tundra CBI Prinsu Top Rack 5.5' Bed","description":"\u003cp\u003ePowder Coat is a Satin Black Textured Finish\u003c\/p\u003e\u003cdiv\u003e2nd Gen Toyota Tundra\u003c\/div\u003e\u003cp\u003eUniversal Prinsu Top Rack (5.5' Length X 54\" Width)\u003c\/p\u003e\u003cdiv\u003ePrinsu original style and design\u003c\/div\u003e\u003cdiv\u003eLow profile\u003c\/div\u003e\u003cdiv\u003eHigh strength alloy crossbars\u003c\/div\u003e\u003cdiv\u003eIntegrated “drop points”\u003c\/div\u003e\u003cdiv\u003eAerodynamic and quiet\u003c\/div\u003e\u003cdiv\u003eFull aluminum construction\u003c\/div\u003e\u003cdiv\u003eCompletely modular\u003c\/div\u003e\u003cdiv\u003eProduct powder coated in a satin black texture\u003c\/div\u003e\u003cp\u003eThe Tundra Toprac is a modular, adjustable, and completely bolt together roof rack for fiberglass toppers such as Leer, A.R.E, and Snugtop that are equipped with Thule\/Yakima tracks. Options are available to bolt racks directly to the topper but are not the preferred method.\u003c\/p\u003e\u003cp\u003eThe rack consists of 2 laser cut side rails constructed of 3\/16″ 5052 aluminum plate. The rack comes with 6 mounting mounting feet that will allow you to bolt the rack to the Thule\/Yakima tracks using the appropriate hardware. This design allows the addition of this roof rack without drilling or modification to your vehicle. The crossbars are made from a 2″ x 1″ aluminum extrusion that has 4 T-SLOT channels with the Prinsu exclusive “drop points.” This offers numerous solutions for tie-down options, cargo security, and the addition of accessories such as tool mounts or lighting. The rack comes shipped with a bare aluminum finish but can be powder coated for an additional fee. All assembly hardware is included.\u003c\/p\u003e\u003cp\u003eThe rack is completely modular in that you choose how your rack is configured. You can also choose the number of crossbars you assemble your rack with. Weight capacity of the racks varies based on the number of crossbars used and their configuration. We expect all consumers to use good judgment and common sense with the loads they plan to carry using these rack systems. The Top Rack is limited by the weight capacity of the topper. Please consult the manufacturer of your topper for guidelines and capacities regarding the load capacity of your individual topper.\u003c\/p\u003e\u003cp\u003e* All Prinsu racks come powder coated satin black and complete, ready to install.\u003c\/p\u003e","brand":"CBI Offroad","offers":[{"title":"Default Title","offer_id":44539305853250,"sku":"96861","price":920.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-default-title-07-21-2nd-gen-tundra-cbi-prinsu-top-rack-5-5-bed-40622581743938.jpg?v=1695223492"},{"product_id":"07-21-2th-gen-tundra-cbi-cab-height-bed-rack","title":"2007-2021 2th Gen Tundra CBI Cab Height Bed Rack","description":"\u003cp\u003eOptional Powder Coat is a Satin Black Textured Finish\u003c\/p\u003e\u003cdiv\u003e2nd Gen Toyota Tundra\u003c\/div\u003e\u003cdiv\u003eDisclamer:\u003c\/div\u003e\u003cdiv\u003eFits Short Bed of approx. 64″ long only\u003c\/div\u003e\u003cdiv\u003eDoes not fit long bed models\u003c\/div\u003e","brand":"CBI Offroad","offers":[{"title":"Bare Metal","offer_id":44582641041730,"sku":"96864","price":1320.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat Black","offer_id":44582641074498,"sku":"96864","price":1520.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-bare-metal-07-21-2th-gen-tundra-cbi-cab-height-bed-rack-40622582694210.jpg?v=1695223501"},{"product_id":"07-21-2nd-gen-tundra-cbi-overland-bed-bars","title":"2007-2021 2nd Gen Tundra CBI Overland Bed Bars","description":"\u003cp\u003ePrice includes the complete kit with all parts needed for installation.\u003c\/p\u003e\u003cp\u003ePowder Coat is a Satin Black Textured Finish\u003c\/p\u003e\u003cp\u003e2nd Gen Toyota Tundra\u003c\/p\u003e\u003cp\u003eOur Overland bars provide an excellent mounting point for roof top tents, bike racks, gear, or just about anything. Mounts to the bed of the Tundra. Kit includes a set of two complete bed bars and rails. Comes powder coated black.\u003cbr\u003e\u003c\/p\u003e","brand":"CBI Offroad","offers":[{"title":"Default Title","offer_id":44539310604610,"sku":"96858","price":600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-default-title-07-21-2nd-gen-tundra-cbi-overland-bed-bars-40622588330306.jpg?v=1695223555"},{"product_id":"07-21-2nd-gen-tundra-cbi-roof-rack-height-bed-rack","title":"2007-2021 2nd Gen Tundra CBI Roof Rack Height Bed Rack","description":"\u003cp\u003eOptional Powder Coat is a Satin Black Textured Finish\u003c\/p\u003e\u003cdiv\u003e2nd Gen Toyota Tundra\u003c\/div\u003e\u003cdiv\u003eDisclamer:\u003c\/div\u003e\u003cdiv\u003eFits Short Bed of approx. 64″ long only\u003c\/div\u003e\u003cdiv\u003eDoes not fit long bed models\u003c\/div\u003e","brand":"CBI Offroad","offers":[{"title":"Bare Metal","offer_id":44582645694786,"sku":"96863","price":1320.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat Black","offer_id":44582645727554,"sku":"96863","price":1520.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-bare-metal-07-21-2nd-gen-tundra-cbi-roof-rack-height-bed-rack-40622590624066.jpg?v=1695223569"},{"product_id":"07-21-2nd-gen-tundra-cbi-prinsu-double-cab-rack","title":"2007-2021 2nd Gen Tundra CBI Prinsu Double Cab Rack","description":"\u003cp\u003eProduct Dimensions: Overall Length 57.5”, Side Rail Height 2-1\/2”, Added height: 1.725”, Clearance between roof and rack .5875”\u003c\/p\u003e\n\u003cdiv\u003eProduct Weight: 43 lbs\u003c\/div\u003e\n\u003cdiv\u003e*Product comes with 6 54” black 2×1 crossbars and 1 54” clear 2×1 crossbar.\u003c\/div\u003e\n\u003cdiv\u003ePowder Coat is a Satin Black Textured Finish\u003c\/div\u003e\n\u003cdiv\u003e2nd Gen Toyota Tundra\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eNoise-reducing edge trim is included with the purchase of the rack\u003c\/div\u003e","brand":"CBI Offroad","offers":[{"title":"Standard","offer_id":44582650872130,"sku":"96865","price":980.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 50\" Lightbars","offer_id":44582650904898,"sku":"96865","price":980.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 40\" Lightbars","offer_id":44582650937666,"sku":"96865","price":980.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-standard-07-21-2nd-gen-tundra-cbi-prinsu-double-cab-rack-40622595735874.png?v=1695223630"},{"product_id":"95-04-1st-gen-tacoma-cbi-prinsu-top-rack-short-bed-5","title":"1995-2004 1st Gen Tacoma CBI Prinsu Top Rack Short Bed 5'","description":"\u003cdiv\u003ePowder Coat is a Satin Black Textured Finish\u003c\/div\u003e\n\u003cp\u003e1st Gen Toyota Tacoma\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRack Length\u003c\/strong\u003e: 4.5'\u003cbr\u003e\u003cstrong\u003eCrossbar Width\u003c\/strong\u003e: 44\"\u003c\/p\u003e\n\u003cp\u003eThe Tacoma Toprac is a modular, adjustable, and completely bolt together roof rack for fiberglass toppers such as Leer, A.R.E, and Snugtop that are equipped with Thule\/Yakima tracks. Options are available to bolt racks directly to the topper but are not the preferred method. Models are available for both the short and long bed Tacoma models.\u003c\/p\u003e\n\u003cp\u003eThe rack consists of 2 laser cut side rails constructed of 3\/16″ 5052 aluminum plate. These rails have 3-4 mounting tabs each that will allow you to bolt the rack to the Thule\/Yakima tracks using the appropriate hardware. This design allows the addition of this roof rack without drilling or modification to your vehicle. The crossbars are made from a 2″ x 1″ aluminum extrusion that has a single top facing T-SLOT channel. This offers numerous solutions for tie-down options, cargo security, and the addition of accessories such as tool mounts or lighting. All product will come in black. All assembly hardware is included.\u003c\/p\u003e\n\u003cp\u003eThe rack is completely modular in that you choose how your rack is configured. You can also choose the number of crossbars you assemble your rack with. The short bed rack comes standard with 6 cross bars for cargo. The long bed rack comes standard with 7 crossbars.\u003c\/p\u003e\n\u003cp\u003eWeight capacity of the racks varies based on the number of crossbars used and their configuration. We expect all consumers to use good judgment and common sense with the loads they plan to carry using these rack systems. The Top Rack is limited by the weight capacity of the topper. Please consult the manufacturer of your topper for guidelines and capacities regarding the load capacity of your individual topper.\u003c\/p\u003e","brand":"CBI Offroad","offers":[{"title":"Default Title","offer_id":44539313520962,"sku":"400-000-027-006","price":920.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-default-title-95-04-1st-gen-tacoma-cbi-prinsu-top-rack-short-bed-5-40622596325698.jpg?v=1695223644"},{"product_id":"96-04-1st-gen-tacoma-cbi-overland-bed-bars","title":"1996-2004 1st Gen Tacoma CBI Overland Bed Bars","description":"\u003cp\u003ePerfect for mounting a roof top tent or adventure accessories\u003c\/p\u003e\u003cdiv\u003eProduct powder coated in a satin black texture\u003c\/div\u003e\u003cdiv\u003eIncludes set of two complete bed bars and rails\u003c\/div\u003e\u003cdiv\u003ePrice includes the complete kit with all parts needed for installation.\u003c\/div\u003e\u003cdiv\u003ePowder Coat is a Satin Black Textured Finish\u003c\/div\u003e\u003cdiv\u003e1st Gen Toyota Tacoma\u003c\/div\u003e\u003cp\u003eOur Overland bars provide an excellent mounting point for roof top tents, bike racks, gear, or just about anything. Mounts to the bed of the Tacoma. Kit includes a set of two complete bed bars and rails. Comes powder coated black.\u003c\/p\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"CBI Offroad","offers":[{"title":"Default Title","offer_id":44539313586498,"sku":"500-000-010-001","price":600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-default-title-96-04-1st-gen-tacoma-cbi-overland-bed-bars-40622596620610.jpg?v=1695223647"},{"product_id":"95-04-1st-gen-tacoma-cbi-prinsu-top-rack-long-bed-6","title":"1995-2004 1st Gen Tacoma CBI Prinsu Top Rack Long Bed 6'","description":"\u003cp\u003ePowder Coat is a Satin Black Textured Finish\u003c\/p\u003e\u003cdiv\u003e1st Gen Toyota Tacoma\u003c\/div\u003e\u003cp\u003eThe Tacoma Toprac is a modular, adjustable, and completely bolt together roof rack for fiberglass toppers such as Leer, A.R.E, and Snugtop that are equipped with Thule\/Yakima tracks. Options are available to bolt racks directly to the topper but are not the preferred method. Models are available for both the short and long bed Tacoma models.\u003c\/p\u003e\u003cp\u003eThe rack consists of 2 laser cut side rails constructed of 3\/16″ 5052 aluminum plate. These rails have 3-4 mounting tabs each that will allow you to bolt the rack to the Thule\/Yakima tracks using the appropriate hardware. This design allows the addition of this roof rack without drilling or modification to your vehicle. The crossbars are made from a 2″ x 1″ aluminum extrusion that has a single top facing T-SLOT channel. This offers numerous solutions for tie-down options, cargo security, and the addition of accessories such as tool mounts or lighting. All product will come in black. All assembly hardware is included.\u003c\/p\u003e\u003cp\u003eThe rack is completely modular in that you choose how your rack is configured. You can also choose the number of crossbars you assemble your rack with. The short bed rack comes standard with 6 cross bars for cargo. The long bed rack comes standard with 7 crossbars.\u003c\/p\u003e\u003cp\u003eWeight capacity of the racks varies based on the number of crossbars used and their configuration. We expect all consumers to use good judgment and common sense with the loads they plan to carry using these rack systems. The Top Rack is limited by the weight capacity of the topper. Please consult the manufacturer of your topper for guidelines and capacities regarding the load capacity of your individual topper.\u003c\/p\u003e","brand":"CBI Offroad","offers":[{"title":"Default Title","offer_id":44539313619266,"sku":"400-000-027-003","price":920.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-default-title-95-04-1st-gen-tacoma-cbi-prinsu-top-rack-long-bed-6-40622596718914.jpg?v=1695223661"},{"product_id":"05-21-2nd-3rd-gen-tacoma-cbi-roof-rack-height-bed-rack","title":"2005-2023 2nd\/3rd Gen Tacoma CBI Roof Rack Height Bed Rack","description":"\u003cp\u003eRoof Rack Height Bedrack for Short Bed Tacomas\u003c\/p\u003e\u003cdiv\u003eOptional Powder Coat is a Satin Black Textured Finish\u003c\/div\u003e\u003cdiv\u003e2nd and 3rd Gen Toyota Tacoma\u003c\/div\u003e","brand":"CBI Offroad","offers":[{"title":"Bare Metal","offer_id":44582651887938,"sku":"96881","price":1100.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat Black","offer_id":44582651920706,"sku":"96881","price":1300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-bare-metal-05-21-2nd-3rd-gen-tacoma-cbi-roof-rack-height-bed-rack-40622596948290.jpg?v=1695223665"},{"product_id":"05-15-2nd-gen-tacoma-cbi-overland-bed-bars","title":"2005-2015 2nd Gen Tacoma CBI Overland Bed Bars","description":"\u003cp\u003eMounts to factory bed rail\u003c\/p\u003e\u003cdiv\u003ePerfect for mounting a roof top tent or adventure accessories\u003c\/div\u003e\u003cdiv\u003ePowder Coat is a Satin Black Textured Finish\u003c\/div\u003e\u003cdiv\u003eInstall time: .75 hrs\u003c\/div\u003e\u003cdiv\u003ePrice includes the complete kit with all parts needed for installation.\u003c\/div\u003e\u003cdiv\u003e2nd Gen Toyota Tacoma\u003c\/div\u003e\u003cp\u003eOur Overland bars provide an excellent mounting point for roof top tents, bike racks, gear, or just about anything. Mounts to the bed rails of the 2nd gen Tacoma. Kit includes a set of two complete bed bars and rails. Comes powder coated black.\u003c\/p\u003e","brand":"CBI Offroad","offers":[{"title":"Default Title","offer_id":44539314045250,"sku":"96880","price":600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-default-title-05-15-2nd-gen-tacoma-cbi-overland-bed-bars-40622597538114.jpg?v=1695223675"},{"product_id":"05-21-2nd-3rd-gen-cbi-tacoma-special-edition-cab-rack-w-desert-air-intake-fitment","title":"2005-2023 2nd\/3rd Gen Tacoma CBI Special Edition Cab Rack w- Desert Air Intake Fitment","description":"\u003cp\u003ePowder Coat is a Satin Black Textured Finish\u003c\/p\u003e\u003cdiv\u003e2nd and 3rd gen Toyota Tacoma\u003c\/div\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\n\u003cp\u003eNoise reducing edge trim is included with the purchase of the rack\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003csection\u003e\u003cimg src=\"https:\/\/cbioffroadfab.com\/wp-content\/uploads\/Toyota-Tacoma-Cab-Rack.jpeg\" cbioffroadfab.com=\"\" wp-content=\"\" uploads=\"\" toyota-tacoma-cab-rack-600x600.jpeg toyota-tacoma-cab-rack-300x300.jpeg toyota-tacoma-cab-rack-150x150.jpeg toyota-tacoma-cab-rack.jpeg toyota-tacoma-cab-rack-480x480.jpeg toyota-tacoma-cab-rack-400x400.jpeg toyota-tacoma-cab-rack-100x100.jpeg\u003e\u003cbr\u003e\u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cbioffroadfab.com\/wp-content\/uploads\/Toyota-Tacoma-Cab-Rack.jpeg\" cbioffroadfab.com=\"\" wp-content=\"\" uploads=\"\" toyota-tacoma-cab-rack-600x600.jpeg toyota-tacoma-cab-rack-300x300.jpeg toyota-tacoma-cab-rack-150x150.jpeg toyota-tacoma-cab-rack.jpeg toyota-tacoma-cab-rack-480x480.jpeg toyota-tacoma-cab-rack-400x400.jpeg toyota-tacoma-cab-rack-100x100.jpeg\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"CBI Offroad","offers":[{"title":"Standard","offer_id":44582652281154,"sku":"96884","price":780.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 40\" Lightbars","offer_id":44582652313922,"sku":"96884","price":780.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-standard-05-21-2nd-3rd-gen-cbi-tacoma-special-edition-cab-rack-w-desert-air-intake-fitment-40622597898562.jpg?v=1695223682"},{"product_id":"95-04-1st-gen-tacoma-cbi-prinsu-double-cab-cab-rack","title":"1995-2004 1st Gen Tacoma CBI Prinsu Double Cab Cab Rack","description":"\u003cp\u003ePowder Coat is a Satin Black Textured Finish\u003c\/p\u003e\u003cdiv\u003eNoise reducing edge trim is included with the purchase of the rack\u003c\/div\u003e\u003cp\u003eThe T1 Tacoma Cabrac (Double cab roof rack) is a modular, adjustable, and completely bolt together roof rack for 1st Generation Toyota Tacoma 1995-2005 Toyota Tacoma in the double cab configuration.\u003c\/p\u003e\u003cp\u003eThis rack requires drilling into the roof of your truck and consists of 2 laser cut side rails constructed of 3\/16″ 5052 aluminum plate. The crossbars are made from a 2″ x 1″ aluminum extrusion that has a top facing T-slot channel. This offers numerous solutions for tie-down options, cargo security, and the addition of accessories such as tool mounts or lighting. The rack comes shipped in black powder coat with black anodized crossbars. All assembly hardware comes in a black zinc finish so as to match a black paint or powder coat finish on the final product. The rack also includes a 1\/8″ 5052 aluminum plate wind deflector to help with aerodynamics and prevent wind noise. Options for integrating a light bar are available. See the Extras\/Add Ons page.\u003c\/p\u003e\u003cp\u003eThe rack is completely modular in that you choose how your rack is configured. Refer to the gallery for an example of standard configurations we have used based on different load sizes and weights. You can also choose the number of crossbars you assemble your rack with. The rack comes standard with 6 cross bars for cargo and 1 additional for mounting of a wind deflector, lightbar or combination of the two.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eWeight capacity of the racks varies based on the number of crossbars used and their configuration. We expect all consumers to use good judgment and common sense with the loads they plan to carry using these rack systems.\u003c\/em\u003e\u003c\/p\u003e","brand":"CBI Offroad","offers":[{"title":"Standard","offer_id":44582653165890,"sku":"96874","price":780.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 40\" Lightbars","offer_id":44582653231426,"sku":"96874","price":780.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-standard-95-04-1st-gen-tacoma-cbi-prinsu-double-cab-cab-rack-40622605369666.jpg?v=1695223688"},{"product_id":"05-15-2nd-gen-tacoma-cbi-overland-bolt-on-rock-sliders","title":"2005-2015 2nd Gen Tacoma CBI Overland Bolt-on Rock Sliders","description":"\u003cp\u003eStrong enough to support the weight of the vehicle\u003c\/p\u003e\u003cdiv\u003eDesigned to provide optimal protection to the rocker panel\u003c\/div\u003e\u003cdiv\u003eNo welding required\u003c\/div\u003e\u003cdiv\u003eInstall time: 1.5 hrs\u003c\/div\u003e\u003cdiv\u003eOptional Powder Coat Satin Black Textured Finish $150\u003c\/div\u003e\u003cdiv\u003e2nd Gen Toyota Tacoma\u003c\/div\u003e\u003cp\u003eCBI Toyota Tacoma rock sliders are strong enough to lift your vehicle with a jack and provide the strength that will take the abuse of gnarly off-road trails rather than the rocker panels of your truck! Sliders can also be ordered with the option “Kickout” design for added off-road protection and aggressive styling. The hardcore off-roader should consider the DOM (Drawn Over Mandrel) tubing upgrade that provides substantially more impact resistance. Completely bolt on application!\u003c\/p\u003e\u003cp\u003e*Tacoma rock sliders DO NOT fit trucks with a 4 cylinder motor.*\u003c\/p\u003e","brand":"CBI Offroad","offers":[{"title":"Standard Bed Length \/ Bare Metal \/ No Kick Outs","offer_id":53586164515179,"sku":"300-000-010-048","price":1300.0,"currency_code":"USD","in_stock":true},{"title":"Standard Bed Length \/ Bare Metal \/ Add Kick Outs","offer_id":53586164547947,"sku":"300-000-010-052","price":1300.0,"currency_code":"USD","in_stock":true},{"title":"Standard Bed Length \/ Powder Coat Black \/ No Kick Outs","offer_id":53586164580715,"sku":"300-000-010-056","price":1380.0,"currency_code":"USD","in_stock":true},{"title":"Standard Bed Length \/ Powder Coat Black \/ Add Kick Outs","offer_id":53586164613483,"sku":"300-000-010-060","price":1380.0,"currency_code":"USD","in_stock":true},{"title":"Double Cab Long Bed \/ Bare Metal \/ No Kick Outs","offer_id":53586164646251,"sku":"300-000-010-047","price":1300.0,"currency_code":"USD","in_stock":true},{"title":"Double Cab Long Bed \/ Bare Metal \/ Add Kick Outs","offer_id":53586164679019,"sku":"300-000-010-051","price":1300.0,"currency_code":"USD","in_stock":true},{"title":"Double Cab Long Bed \/ Powder Coat Black \/ No Kick Outs","offer_id":53586164711787,"sku":"300-000-010-055","price":1380.0,"currency_code":"USD","in_stock":true},{"title":"Double Cab Long Bed \/ Powder Coat Black \/ Add Kick Outs","offer_id":53586164744555,"sku":"300-000-010-059","price":1380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-armor-standard-bed-length-hrew-standard-hot-rolled-electricalled-welded-no-kick-outs-05-15-2nd-gen-tacoma-cbi-overland-bolt-on-rock-sliders-40622606778690.jpg?v=1695223703"},{"product_id":"05-21-2nd-3rd-gen-tacoma-cbi-prinsu-habitat-rack","title":"2005-2023 2nd\/3rd Gen Tacoma CBI Prinsu Habitat Rack","description":"\u003cp\u003eFOR USE WITH OVER-CAB CAMPERS\u003c\/p\u003e\u003cdiv\u003eFull aluminum construction (no rust)\u003c\/div\u003e\u003cdiv\u003eModular design to fit your adventure’s needs\u003c\/div\u003e\u003cdiv\u003ePowder Coat is a Satin Black Textured Finish\u003c\/div\u003e\u003cdiv\u003eNoise reducing edge trim is included with the purchase of the rack\u003c\/div\u003e\u003cp\u003eThe Tacoma Habitat rack is a modular, adjustable, and completely bolt together roof rack for 2005-2019 Toyota Tacoma’s. This rack has been specifically designed to be a PARTIAL rack that will work with in-the-bed campers like the AT Habitat or a 4wheel camper model that overhang over the cab of the truck. This rack is NOT designed to be put on an access cab Tacoma that is not running an in-the-bed camper model that overhangs the cab of the truck. (*If this is you please see our Access Cab Rack or the Cab Rack) Please keep in mind that each brand and model of in-the-bed campers vary and that the clearance from the top of the cab and the bottom of the camper may vary but in most cases, our rack will work for the majority of models!\u003c\/p\u003e\u003cp\u003eThe rack consists of 2 laser cut side rails constructed of 3\/16″ 5052 aluminum plate. These rails have 2 mounting platforms each that will allow you to bolt the rack into the forward mounting points on the cab.\u003c\/p\u003e\u003cp\u003eThe crossbars are made from an aluminum extrusion that has a top facing T-slot channel and the exclusive Prinsu “drop points.” This offers numerous solutions for tie-down options, cargo security, and the addition of accessories such as tool mounts or lighting. All product will come in black. All assembly hardware is provided. The rack also includes a 1\/8″ 5052 aluminum plate wind deflector to help with aerodynamics and prevent wind noise. The rack is completely modular in that you choose how your rack is configured. Refer to the gallery for an example of standard configurations we have used based on different load sizes and weights. You can also choose the number of crossbars you assemble your rack with. The rack comes standard with 5 cross bars for cargo and 2 additional for mounting of a wind deflector, lightbar or combination of the two.\u2028 All Prinsu racks come powder coated satin black. Weight capacity of the racks varies based on the number of crossbars used and their configuration. We expect all consumers to use good judgment and common sense with the loads they plan to carry using these rack systems.\u003c\/p\u003e\u003cp\u003e* All Prinsu racks come powder coated satin black and complete, ready to install.\u003c\/p\u003e","brand":"CBI Offroad","offers":[{"title":"Standard","offer_id":44582656999746,"sku":"96896","price":840.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 40\" Lightbars","offer_id":44582657032514,"sku":"96896","price":840.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-standard-05-21-2nd-3rd-gen-tacoma-cbi-prinsu-habitat-rack-40622607237442.png?v=1695223707"},{"product_id":"05-21-2nd-3rd-tacoma-cbi-prinsu-top-rack-short-bed","title":"2005-2023 2nd\/3rd Gen Tacoma CBI Prinsu Top Rack Short Bed","description":"\u003cp\u003ePowder Coat is a Satin Black Textured Finish\u003c\/p\u003e\u003cdiv\u003e2nd \u0026amp; 3rd Gen Toyota Tacoma\u003c\/div\u003e\u003cp\u003eThe Tacoma Toprac is a modular, adjustable, and completely bolt together roof rack for fiberglass toppers such as Leer, A.R.E, and Snugtop that are equipped with Thule\/Yakima tracks. Options are available to bolt racks directly to the topper but are not the preferred method. Models are available for both the short and long bed Tacoma models.\u003c\/p\u003e\u003cp\u003eThe rack consists of 2 laser cut side rails constructed of 3\/16″ 5052 aluminum plate. These rails have 3-4 mounting tabs each that will allow you to bolt the rack to the Thule\/Yakima tracks using the appropriate hardware. This design allows the addition of this roof rack without drilling or modification to your vehicle. The crossbars are made from a 2″ x 1″ aluminum extrusion that has a single top facing T-SLOT channel. This offers numerous solutions for tie-down options, cargo security, and the addition of accessories such as tool mounts or lighting. All product will come in black. All assembly hardware is included.\u003c\/p\u003e\u003cp\u003eThe rack is completely modular in that you choose how your rack is configured. You can also choose the number of crossbars you assemble your rack with. The short bed rack comes standard with 6 cross bars for cargo. The long bed rack comes standard with 7 cross bars.\u003c\/p\u003e\u003cp\u003eWeight capacity of the racks varies based on the number of crossbars used and their configuration. We expect all consumers to use good judgment and common sense with the loads they plan to carry using these rack systems. The Toprac is limited by the weight capacity of the topper. Please consult the manufacturer of your topper for guidelines and capacities regarding the load capacity of your individual topper.\u003c\/p\u003e","brand":"CBI Offroad","offers":[{"title":"Default Title","offer_id":44539317879106,"sku":"96879","price":880.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-default-title-05-21-2nd-3rd-tacoma-cbi-prinsu-top-rack-short-bed-40622607991106.jpg?v=1695223722"},{"product_id":"05-21-2nd-gen-tacoma-cbi-prinsu-cab-rack","title":"2005-2023 2nd\/3rd Gen Tacoma CBI Prinsu Cab Rack","description":"\u003cp\u003ePowder Coat is a Satin Black Textured Finish\u003c\/p\u003e\u003cdiv\u003eNoise reducing edge trim is included with the purchase of the rack\u003c\/div\u003e\u003cp\u003eThe Tacoma Cabrac is a modular, adjustable, and completely bolt together roof rack for 2005-2019 Toyota Tacoma in the double cab configuration. See also our model for the access cab configuration.\u003c\/p\u003e\u003cp\u003eThe rack consists of 2 laser cut side rails constructed of 3\/16″ 5052 aluminum plate. These rails have 3 mounting tabs each that will allow you to bolt the rack into the 5 factory mounting holes on each side of the roof. This design allows the addition of this roof rack without drilling or modification to your vehicle. The crossbars are made from a 2″ x 1″ aluminum extrusion that has a top facing T-slot channel. This offers numerous solutions for tie-down options, cargo security, and the addition of accessories such as tool mounts or lighting. All product will come in black. All assembly hardware comes in a black zinc finish so as to match a black paint or powder coat finish on the final product. The rack also includes a 1\/8″ 5052 aluminum plate wind deflector to help with aerodynamics and prevent wind noise. Options for integrating a light bar are available. See the Extras\/Add Ons page.\u003c\/p\u003e\u003cp\u003eThe rack is completely modular in that you choose how your rack is configured. Refer to the gallery for an example of standard configurations we have used based on different load sizes and weights. You can also choose the number of crossbars you assemble your rack with. The rack comes standard with 6 cross bars for cargo and 1 additional for mounting of a wind deflector, lightbar or combination of the two.\u003c\/p\u003e\u003cp\u003eWeight capacity of the racks varies based on the number of crossbars used and their configuration. We expect all consumers to use good judgment and common sense with the loads they plan to carry using these rack systems.\u003c\/p\u003e","brand":"CBI Offroad","offers":[{"title":"Standard","offer_id":44582657163586,"sku":"96878","price":780.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 40\" Lightbars","offer_id":44582657196354,"sku":"96878","price":780.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-standard-05-21-2nd-gen-tacoma-cbi-prinsu-cab-rack-40622608351554.jpg?v=1695223729"},{"product_id":"05-22-2nd-3rd-gen-tacoma-cbi-prinsu-access-rack","title":"2005-2023 2nd\/3rd Gen Tacoma CBI Prinsu Access Rack","description":"\u003cp\u003ePowder Coat is a Satin Black Textured Finish\u003c\/p\u003e\u003cdiv\u003eNoise reducing edge trim is included with the purchase of the rack\u003c\/div\u003e\u003cp\u003eThe Tacoma Accessrac is a modular, adjustable, and completely bolt together roof rack for 2005-2019 Toyota Tacoma in the access cab configuration. The rack consists of 2 laser cut side rails constructed of 3\/16″ 5052 aluminum plate. These rails have 3 mounting platforms each that will allow you to bolt the rack into 12 rivet nut plus nuts that you will install. The 6 plus nuts on each side of the roof provide a secure mounting system for the rack. This rack will require you to drill 6 holes in each of the 2 channels on the rooftop. The crossbars are made from an aluminum extrusion that has a top facing T-slot channel. This offers numerous solutions for tie-down options, cargo security, and the addition of accessories such as tool mounts or lighting. All product will come in black.\u003c\/p\u003e\u003cp\u003eAll assembly hardware is provided. The rack also includes a 1\/8″ 5052 aluminum plate wind deflector to help with aerodynamics and prevent wind noise. The rack is completely modular in that you choose how your rack is configured. Refer to the gallery for an example of standard configurations we have used based on different load sizes and weights. You can also choose the number of crossbars you assemble your rack with. The rack comes standard with 5 cross bars for cargo and 2 additional for mounting of a wind deflector, lightbar or combination of the two. Weight capacity of the racks varies based on the number of crossbars used and their configuration. We expect all consumers to use good judgment and common sense with the loads they plan to carry using these rack systems.\u003c\/p\u003e\u003cp\u003e* THIS ROOF RACK REQUIRES DRILLING INTO THE FACTORY ROOF FOR INSTALLATION OF NUT CERTS. **ON SOME MODELS, AND DEPENDING ON INSTALLATION, THE REAR MOUNTING HARDWARE MAY CONFLICT WITH THE AIRBAG MOUNTING BRACKET. WE RECOMMEND DROPPING THE HEADLINER IN THE REAR TO ENSURE THAT NO DAMAGE TO THE AIRBAGS OCCUR.\u003c\/p\u003e","brand":"CBI Offroad","offers":[{"title":"Standard \/ Black","offer_id":44582657261890,"sku":"96882","price":780.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Bare","offer_id":44582657294658,"sku":"96882","price":780.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Grey","offer_id":44582657327426,"sku":"96882","price":780.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ White","offer_id":44582657360194,"sku":"96882","price":780.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 40\" Lightbars \/ Black","offer_id":44582657392962,"sku":"96882","price":780.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 40\" Lightbars \/ Bare","offer_id":44582657425730,"sku":"96882","price":780.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 40\" Lightbars \/ Grey","offer_id":44582657458498,"sku":"96882","price":780.0,"currency_code":"USD","in_stock":true},{"title":"Cutout for 40\" Lightbars \/ White","offer_id":44582657491266,"sku":"96882","price":780.0,"currency_code":"USD","in_stock":true},{"title":"LP4 Light Pod Cut Out \/ Black","offer_id":44582657524034,"sku":"96882","price":960.0,"currency_code":"USD","in_stock":true},{"title":"LP4 Light Pod Cut Out \/ Bare","offer_id":44582657556802,"sku":"96882","price":960.0,"currency_code":"USD","in_stock":true},{"title":"LP4 Light Pod Cut Out \/ Grey","offer_id":44582657589570,"sku":"96882","price":960.0,"currency_code":"USD","in_stock":true},{"title":"LP4 Light Pod Cut Out \/ White","offer_id":44582657622338,"sku":"96882","price":960.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-standard-black-05-22-2nd-3rd-gen-tacoma-cbi-prinsu-access-rack-40622608679234.jpg?v=1695223734"},{"product_id":"05-21-2nd-3rd-gen-tacoma-cbi-cab-height-bed-rack","title":"2005-2023 2nd\/3rd Gen Tacoma CBI Cab Height Bed Rack","description":"\u003cp\u003eCab Height Bedrack for Short Bed Tacomas\u003c\/p\u003e\u003cdiv\u003eOptional Powder Coat is a Satin Black Textured Finish\u003c\/div\u003e\u003cdiv\u003e2nd and 3rd Gen Toyota Tacoma\u003c\/div\u003e","brand":"CBI Offroad","offers":[{"title":"Bare Metal","offer_id":44582663094594,"sku":"96885","price":1100.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat Black","offer_id":44582663127362,"sku":"96885","price":1300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-bare-metal-05-21-2nd-3rd-gen-tacoma-cbi-cab-height-bed-rack-40622609563970.jpg?v=1695223750"},{"product_id":"05-15-2nd-gen-tacoma-cbi-overland-bed-rack","title":"2005-2015 2nd Gen Tacoma CBI Overland Bed Rack","description":"\u003cp\u003eMounts to factory bed rail\u003c\/p\u003e\u003cdiv\u003ePerfect for mounting a tent and adventure accessories\u003c\/div\u003e\u003cdiv\u003eAvailable in steel and aluminum\u003c\/div\u003e\u003cdiv\u003eInstall time: 1 hr\u003c\/div\u003e\u003cdiv\u003eOptional Powder Coat $200\u003c\/div\u003e\u003cdiv\u003eOptional Powder Coat is a Satin Black Textured Finish\u003c\/div\u003e\u003cp\u003eOur Overland bed rack breaks the mold for the 2nd gen Tacoma. With its low profile, multiple mounting and tie down points, there is literally nothing this bed rack can’t handle. Take all your gear with you on your next overland trip and have room to spare. Available in steel or aluminum.\u003c\/p\u003e","brand":"CBI Offroad","offers":[{"title":"Steel \/ Short Bed \/ Bare Metal","offer_id":44582667256130,"sku":"96898","price":1000.0,"currency_code":"USD","in_stock":true},{"title":"Steel \/ Short Bed \/ Powder Coat Black","offer_id":44582667288898,"sku":"96898","price":1200.0,"currency_code":"USD","in_stock":true},{"title":"Steel \/ Long Bed \/ Bare Metal","offer_id":44582667321666,"sku":"96898","price":1050.0,"currency_code":"USD","in_stock":true},{"title":"Steel \/ Long Bed \/ Powder Coat Black","offer_id":44582667354434,"sku":"96898","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-steel-short-bed-bare-metal-05-15-2nd-gen-tacoma-cbi-overland-bed-rack-40622611267906.jpg?v=1695223797"},{"product_id":"05-21-2nd-3rd-gen-tacoma-cbi-prinsu-top-rack-long-bed","title":"2005-2023 2nd\/3rd Gen Tacoma CBI Prinsu Top Rack Long Bed","description":"\u003cp\u003ePowder Coat is a Satin Black Textured Finish\u003c\/p\u003e\u003cdiv\u003e2nd \u0026amp; 3rd Gen Toyota Tacoma\u003c\/div\u003e\u003cp\u003eThe Tacoma Toprac is a modular, adjustable, and completely bolt together roof rack for fiberglass toppers such as Leer, A.R.E, and Snugtop that are equipped with Thule\/Yakima tracks. Options are available to bolt racks directly to the topper but are not the preferred method. Models are available for both the short and long bed Tacoma models.\u003c\/p\u003e\u003cp\u003eThe rack consists of 2 laser cut side rails constructed of 3\/16″ 5052 aluminum plate. These rails have 3-4 mounting tabs each that will allow you to bolt the rack to the Thule\/Yakima tracks using the appropriate hardware. This design allows the addition of this roof rack without drilling or modification to your vehicle. The crossbars are made from a 2″ x 1″ aluminum extrusion that has a single top facing T-SLOT channel. This offers numerous solutions for tie-down options, cargo security, and the addition of accessories such as tool mounts or lighting. All product will come in black. All assembly hardware is included.\u003c\/p\u003e\u003cp\u003eThe rack is completely modular in that you choose how your rack is configured. You can also choose the number of crossbars you assemble your rack with. The short bed rack comes standard with 6 cross bars for cargo. The long bed rack comes standard with 7 cross bars.\u003c\/p\u003e\u003cp\u003eWeight capacity of the racks varies based on the number of crossbars used and their configuration. We expect all consumers to use good judgment and common sense with the loads they plan to carry using these rack systems. The Toprac is limited by the weight capacity of the topper. Please consult the manufacturer of your topper for guidelines and capacities regarding the load capacity of your individual topper.\u003c\/p\u003e","brand":"CBI Offroad","offers":[{"title":"Default Title","offer_id":44539324072258,"sku":"96899","price":920.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/cbi-offroad-exterior-default-title-05-21-2nd-3rd-gen-tacoma-cbi-prinsu-top-rack-long-bed-40622613299522.jpg?v=1695223819"},{"product_id":"96-02-3rd-gen-4runner-95-04-1st-gen-tacoma-aluminum-washer-fluid-relocation-reservoir","title":"1996-2002 4Runner \u0026 1995-2004 Tacoma Aluminum Washer Fluid Relocation Reservoir","description":"\u003cp\u003e\u003ci\u003eDue to popular demand, all reservoirs now come with a raw aluminum finish. This means that they are much shinier (as seen in the image with a large batch of reservoirs on the table). Previously they were anodized which made a dull matte finish. You may leave it as a raw aluminum finish or powder coat\/anodize to your color of choice. This decision was made because many people wanted it to be more customizable.\u003c\/i\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIntroducing the 3rd Gen 4Runner and 1st Gen Tacoma washer fluid relocation reservoir. This replaces the factory washer fluid reservoir with a custom made aluminum reservoir. The reservoir sits behind the passenger side headlight and in front of the air box. Welded together from 5052 aluminum with a custom vented billet aluminum cap made from 6061 aluminum, this reservoir utilizes every bit of room in the engine bay to maximize the amount of fluid you are able to carry.\u003c\/p\u003e\n\u003cp\u003eThe reservoir mounts to factory mounting positions using the included aluminum bracket. Mounting hardware is included for installation.\u003c\/p\u003e\n\u003cp\u003eWhy do I need to relocate my reservoir?\u003c\/p\u003e\n\u003cp\u003eThere are a variety of reasons, but here are some of the most common.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eIf you are running a 33\" or larger tire, the tire will hit the factory reservoir during tire compression. With a 35\" or larger tire, it is even possible to hit the reservoir during normal street driving use. With a hard enough hit, you will destroy the stock tank.\u003c\/li\u003e\n\u003cli\u003eAdding an aftermarket bumper gives tons of ground clearance but it completely exposes the factory reservoir and pumps. Don't believe me? Take a look! The factory pumps and hoses are hanging out in the open and waiting for a rock or branch to rip them out.\u003c\/li\u003e\n\u003cli\u003eThe factory reservoir is an eyesore when viewing the vehicle from the front. Relocating the reservoir into the engine bay allows you to keep a clean look on the exterior of the vehicle.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eVehicle Fitment\u003c\/p\u003e\n\u003cp\u003eSome vehicles came with different engines. This reservoir has currently only been tested to fit on 3rd Gen 4Runners and 1st Gen Tacos with a 5vz-fe engine. The 4 Cylinder engines have a different air box design and this reservoir may not fit.\u003c\/p\u003e\n\u003cp\u003eIf you have a Tacoma or only plan on using a single pump, please select the Tacoma option. Only one hole will be drilled for the pump.\u003c\/p\u003e\n\u003cp\u003eProduct Specs\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReservoir body and bracket welded from 5052 Aluminum\u003c\/li\u003e\n\u003cli\u003eBillet cap cut from 6061 Aluminum\u003c\/li\u003e\n\u003cli\u003eBillet cap is vented to allow inside pressure to equalize\u003c\/li\u003e\n\u003cli\u003eIncludes 4 nuts\/bolts to mount reservoir to mounting bracket\u003c\/li\u003e\n\u003cli\u003eIncludes one bolt to mount reservoir bracket to vehicle body\u003c\/li\u003e\n\u003cli\u003eUtilizes both of your OEM Pumps and gaskets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=mQpe5N0LCFs\" aria-describedby=\"a11y-new-window-external-message\" rel=\"null noopener\" target=\"_blank\"\u003eWant to learn more about the product? Click here for Installation and a product review.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e~\u003cem\u003e This product is highly custom. \u003c\/em\u003e\u003ci\u003eThere may be minor blemishes on the surface of the reservoir that will not affect the performance of the product. The reservoir is guaranteed to be watertight and includes a 1 year warranty. Warranty covers normal use scenarios of the product and does not cover abuse or neglect. This reservoir utilizes the OEM gaskets. If your OEM gasket is brittle, then it may be a good idea to replace the gasket!\u003c\/i\u003e\u003c\/p\u003e","brand":"Snowbound Customs","offers":[{"title":"3rd Gen 4Runner Dual Hole","offer_id":44582679839042,"sku":"SNO1001","price":259.0,"currency_code":"USD","in_stock":true},{"title":"1st Gen Tacoma Single Hole","offer_id":44582679871810,"sku":"SNO1002","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/snowbound-customs-exterior-3rd-gen-4runner-dual-hole-96-02-3rd-gen-4runner-95-04-1st-gen-tacoma-aluminum-washer-fluid-relocation-reservoir-40622619427138.png?v=1695223957"},{"product_id":"21-bronco-spare-tire-delete-kit","title":"2021+ 6th Gen Bronco Spare Tire Delete Kit","description":"\u003cp\u003e\u003cu\u003e\u003cstrong\u003eSpare Tire Delete Description\u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy bolt on installation that reuses factory hardware\u003c\/li\u003e\n\u003cli\u003eCNC precision cut from ⅛” steel\u003c\/li\u003e\n\u003cli\u003eCompatible with our Bronco rear bumper, stock bumper, or other equivalents\u003c\/li\u003e\n\u003cli\u003eIncludes all required mounting and wiring hardware, plate padding, and in depth instructions\u003c\/li\u003e\n\u003cli\u003eRelocates factory third brake light and backup camera\u003c\/li\u003e\n\u003cli\u003eIncludes easy bolt on license plate lights\u003c\/li\u003e\n\u003cli\u003eIncludes built in bottle opener grommet cap\u003c\/li\u003e\n\u003cli\u003ePowder coating options available\u003c\/li\u003e\n\u003cli\u003eHand built and designed in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: This kit is not compatible with the Bronco Raptor.\u003c\/strong\u003e\u003c\/p\u003e","brand":"SRQ Fabrications","offers":[{"title":"Raw Steel \/ Stock Bumper Location","offer_id":44582683345218,"sku":"SRQ1057","price":329.99,"currency_code":"USD","in_stock":true},{"title":"Raw Steel \/ Relocation Harness \u0026 Lights","offer_id":44582683377986,"sku":"SRQ1058","price":354.99,"currency_code":"USD","in_stock":true},{"title":"Satin Black Powdercoat \/ Stock Bumper Location","offer_id":44582683410754,"sku":"SRQ1059","price":429.99,"currency_code":"USD","in_stock":true},{"title":"Satin Black Powdercoat \/ Relocation Harness \u0026 Lights","offer_id":44582683443522,"sku":"SRQ1060","price":454.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/srq-fabrications-exterior-raw-steel-stock-bumper-location-2021-bronco-spare-tire-delete-kit-40622621720898.png?v=1695224051"},{"product_id":"96-02-3rd-gen-4runner-trd-grille","title":"1996-2002 3rd Gen 4Runner TRD Grille","description":"\u003cp\u003eA 1996 -2002 3rd Gen 4Runner grille with a \"Toyota\" insert installed in the middle! You can make your grille stand out from the others with emblem color, lighting, and surround color options!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePaint Options: \u003c\/strong\u003eIf you selected the colormatch paint option, please enter your paint code in the text field. This can be found inside the driver's door jam. Feel free to reach out if you have any questions regarding how to locate your paint code.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e 3rd Gen 4Runners are 20-year-old vehicles. The paint on your truck may have faded over time or been repainted. We paint to the exact paint code of the truck when it left the factory, not to how your truck looks 15 years later. Please keep this in mind when selecting this option.\u003c\/p\u003e","brand":"SRQ Fabrications","offers":[{"title":"Default Title","offer_id":44582693962050,"sku":"SRQ1064","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/srq-fabrications-exterior-default-title-96-02-3rd-gen-4runner-trd-grille-40622629355842.png?v=1695224228"},{"product_id":"96-02-3rd-gen-4runner-rear-hatch-bump-stop-replacements","title":"1996-2002 3rd Gen 4Runner Rear Hatch Bump Stop Replacements","description":"\u003cp\u003eThese 3D printed rubber bump-stops are designed to replace the 3rd Gen 4Runner rear hatch bump-stops. They are printed from a high quality TPU and are designed to be 3mm shorter than the factory bump stops to accommodate brackets that utilize this mounting area. This fixes a common issue where the rear hatch is stiff or hard to close after adding a rear facing CB antenna mount or a light bracket. The brackets have washers press fit into each hole to provide for better load distribution similar to the factory mounts.\u003c\/p\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e","brand":"Snowbound Customs","offers":[{"title":"Single","offer_id":44582710149442,"sku":"SNO1003","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Pair","offer_id":44582710182210,"sku":"SNO1004","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/snowbound-customs-exterior-single-96-02-3rd-gen-4runner-rear-hatch-bump-stop-replacements-40622637547842.png?v=1695224400"},{"product_id":"toyota-tri-color-grille-badge","title":"Toyota Tri-Color Grille Badge","description":"\u003cp\u003eMake your TRD grille stand out from the other with this easy to install Tri Color grille badge!\u003cstrong\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SRQ Fabrications","offers":[{"title":"Yellow\/Orange\/Red","offer_id":44582711722306,"sku":"SRQ1067","price":19.95,"currency_code":"USD","in_stock":true},{"title":"White\/Light Blue\/Blue","offer_id":44582711755074,"sku":"SRQ1068","price":19.95,"currency_code":"USD","in_stock":true},{"title":"Black\/Grey\/White","offer_id":44582711787842,"sku":"SRQ1069","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/srq-fabrications-exterior-yellow-orange-red-toyota-tri-color-grille-badge-40622639939906.png?v=1695224442"},{"product_id":"03-05-4th-gen-4runner-special-edition-trd-grille","title":"2003-2005 4th Gen 4Runner Special Edition TRD Grille","description":"\u003cp\u003eA custom 2003-2005 4th Gen grille with a 3rd Gen Tacoma TRD Pro insert installed in the middle! With emblem color, lighting, and surround color options, you can make your grille stand out from the others! This grille does include the Toyota Emblem.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003ePAINT OPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf you selected the colormatch paint option, please enter your paint code in the text field. This can be found inside the driver door jam. Feel free to reach out if you have any questions regarding how to locate your paint code.\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e**4th Gen 4Runners are 15 year old vehicles, the paint on your truck may have faded over time or been repainted. We paint to the exact paint code of the truck when it left the factory, not to how your truck looks 15 years later, please keep this in mind when selecting this option**\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SRQ Fabrications","offers":[{"title":"White\/Light Blue\/Blue Stripes \/ None \/ Silver","offer_id":44582721880386,"sku":"SRQ1071","price":384.95,"currency_code":"USD","in_stock":true},{"title":"White\/Light Blue\/Blue Stripes \/ None \/ Flat Black","offer_id":44582721913154,"sku":"SRQ1072","price":399.95,"currency_code":"USD","in_stock":true},{"title":"White\/Light Blue\/Blue Stripes \/ None \/ Red","offer_id":44582721945922,"sku":"SRQ1073","price":399.95,"currency_code":"USD","in_stock":true},{"title":"White\/Light Blue\/Blue Stripes \/ None \/ White","offer_id":44582721978690,"sku":"SRQ1074","price":399.95,"currency_code":"USD","in_stock":true},{"title":"White\/Light Blue\/Blue Stripes \/ None \/ Blue","offer_id":44582722011458,"sku":"SRQ1075","price":399.95,"currency_code":"USD","in_stock":true},{"title":"White\/Light Blue\/Blue Stripes \/ Raptor Lights \/ Silver","offer_id":44582722044226,"sku":"SRQ1076","price":414.95,"currency_code":"USD","in_stock":true},{"title":"White\/Light Blue\/Blue Stripes \/ Raptor Lights \/ Flat Black","offer_id":44582722076994,"sku":"SRQ1077","price":429.95,"currency_code":"USD","in_stock":true},{"title":"White\/Light Blue\/Blue Stripes \/ Raptor Lights \/ Red","offer_id":44582722109762,"sku":"SRQ1078","price":429.95,"currency_code":"USD","in_stock":true},{"title":"White\/Light Blue\/Blue Stripes \/ Raptor Lights \/ White","offer_id":44582722142530,"sku":"SRQ1079","price":429.95,"currency_code":"USD","in_stock":true},{"title":"White\/Light Blue\/Blue Stripes \/ Raptor Lights \/ Blue","offer_id":44582722175298,"sku":"SRQ1080","price":429.95,"currency_code":"USD","in_stock":true},{"title":"Yellow\/Orange\/Red Stripes \/ None \/ Silver","offer_id":44582722208066,"sku":"SRQ1081","price":384.95,"currency_code":"USD","in_stock":true},{"title":"Yellow\/Orange\/Red Stripes \/ None \/ Flat Black","offer_id":44582722240834,"sku":"SRQ1082","price":399.95,"currency_code":"USD","in_stock":true},{"title":"Yellow\/Orange\/Red Stripes \/ None \/ Red","offer_id":44582722273602,"sku":"SRQ1083","price":399.95,"currency_code":"USD","in_stock":true},{"title":"Yellow\/Orange\/Red Stripes \/ None \/ White","offer_id":44582722306370,"sku":"SRQ1084","price":399.95,"currency_code":"USD","in_stock":true},{"title":"Yellow\/Orange\/Red Stripes \/ None \/ Blue","offer_id":44582722339138,"sku":"SRQ1085","price":399.95,"currency_code":"USD","in_stock":true},{"title":"Yellow\/Orange\/Red Stripes \/ Raptor Lights \/ Silver","offer_id":44582722371906,"sku":"SRQ1086","price":414.95,"currency_code":"USD","in_stock":true},{"title":"Yellow\/Orange\/Red Stripes \/ Raptor Lights \/ Flat Black","offer_id":44582722404674,"sku":"SRQ1087","price":429.95,"currency_code":"USD","in_stock":true},{"title":"Yellow\/Orange\/Red Stripes \/ Raptor Lights \/ Red","offer_id":44582722437442,"sku":"SRQ1088","price":429.95,"currency_code":"USD","in_stock":true},{"title":"Yellow\/Orange\/Red Stripes \/ Raptor Lights \/ White","offer_id":44582722470210,"sku":"SRQ1089","price":429.95,"currency_code":"USD","in_stock":true},{"title":"Yellow\/Orange\/Red Stripes \/ Raptor Lights \/ Blue","offer_id":44582722502978,"sku":"SRQ1090","price":429.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/srq-fabrications-exterior-white-light-blue-blue-stripes-none-silver-2003-2005-4th-gen-4runner-special-edition-trd-grille-40622649672002.png?v=1695224629"},{"product_id":"the-starlight-jeep-wrangler-jl-roof-rack","title":"The Starlight (Jeep Wrangler JL Roof Rack)","description":"\u003cp class=\"\" data-pm-slice=\"1 1 []\"\u003eThis modular roof rack, for the 2018-2023 Jeep Wrangler JL, expands on our lineup of tried and true rack systems and brings them to Jeep. Our racks are some of the toughest on the market and are designed to get your gear to the places that matter the most. Explore more and worry less with our industry-leading 1\/4” thick aircraft-grade aluminum side panels and 3\/16\" steel gutter mounts. Secure your gear by bolting into one of the 9 extrusion crossbars or by strapping it directly to the side plates. This rack is two separate sections, allowing you to remove the Freedom Top and still have a rack on the rear portion of the top. This rack is “drill-free” and requires zero modification to your vehicle. \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp class=\"\" data-pm-slice=\"1 1 []\"\u003e\u003cstrong\u003ePowder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\" data-pm-slice=\"1 1 []\"\u003e\u003cstrong\u003eAll rack gutter mounts will ship powder coated black.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Sherpa Equipment Company","offers":[{"title":"Half Height (For Single Row Light Bar)","offer_id":45257927196994,"sku":"133744","price":1559.0,"currency_code":"USD","in_stock":true},{"title":"Full Height (No Light Bar)","offer_id":45257927328066,"sku":"133844","price":1559.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/files\/sherpa-equipment-company-roof-rack-half-height-for-single-row-light-bar-black-textured-powder-coat-black-anodized-the-starlight-jeep-wrangler-jl-roof-rack-42575811903810.jpg?v=1695224704"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/4389\/2290\/collections\/srq-fabrications-exterior-default-title-16-23-3rd-gen-tacoma-trd-grille-42709852193090.jpg?v=1764866762","url":"https:\/\/www.srqfabrications.com\/collections\/exterior.oembed?page=7","provider":"SRQ Fabrications","version":"1.0","type":"link"}